Abstract:A theoretically based relationship for the Darcy–Weisbach friction factor $f$ for rough-bed open-channel flows is derived and discussed. The derivation procedure is based on the double averaging (in time and space) of the Navier–Stokes equation followed by repeated integration across the flow. The obtained relationship explicitly shows that the friction factor can be split into at least five additive components, due to: (i) viscous stress; (ii) turbulent stress; (iii) dispersive stress (which in turn can be subdivided into two parts, due to bed roughness and secondary currents); (iv) flow unsteadiness and non-uniformity; and (v) spatial heterogeneity of fluid stresses in a bed-parallel plane. These constitutive components account for the roughness geometry effect and highlight the significance of the turbulent and dispersive stresses in the near-bed region where their values are largest. To explore the potential of the proposed relationship, an extensive data set has been assembled by employing specially designed large-eddy simulations and laboratory experiments for a wide range of Reynolds numbers. Flows over self-affine rough boundaries, which are representative of natural and man-made surfaces, are considered. The data analysis focuses on the effects of roughness geometry (i.e. spectral slope in the bed elevation spectra), relative submergence of roughness elements and flow and roughness Reynolds numbers, all of which are found to be substantial. It is revealed that at sufficiently high Reynolds numbers the roughness-induced and secondary-currents-induced dispersive stresses may play significant roles in generating bed friction, complementing the dominant turbulent stress contribution.

Skin-friction from temperature and velocity data around a wall-mounted cube

On Skin Friction in Wall-Bounded Turbulence

Accurate Method for Estimating Wall-Friction Based on Analytical Wall-Law Model

Image-based Modelling of the Skin-Friction Coefficient in Compressible Boundary-Layer Transition

Integral methods for friction decomposition and their extensions to rough-wall flows

Uncovering wall-shear stress dynamics from neural-network enhanced fluid flow measurements

Boundary layer analysis of ventilated partial cavity for friction drag reduction

Falling Film Flow of a Viscoelastic Fluid along a Wall

Simultaneous Measurements of Surface Spanwise Waves and Velocity in a Turbulent Boundary Layer

Turbulent skin-friction reduction by wavy surfaces

Thermal boundary layers in turbulent Rayleigh-Bénard convection with rough surfaces

Dynamic Wall Shear Stress Measurement using Event-based 3D Particle Tracking

A systematic study of turbulent heat transfer over rough walls

Local-Energy-Conservation-Based Decomposition Method for Wall Friction and Heat Flux

Feasibility of skin-friction diagnostics based on surface pressure gradient field

Wall shear stress measurement of turbulent bubbly flows using laser Doppler displacement sensor

Accurately predicting turbulent heat transfer over rough walls: a review of measurement equipment and methods

Turbulent Boundary Layer over Porous Media with Wall-Normal Permeability

An integral method to determine mean skin friction in turbulent boundary layers

IMAGE-BASED MODELING OF THE SKIN-FRICTION COEFFICIENT IN COMPRESSIBLE BOUNDARY-LAYER TRANSITION

Friction factor decomposition for rough-wall flows: theoretical background and application to open-channel flows