Abstract:A folding wing morphing aircraft should complete the folding and unfolding process of its wings while in flight. Calculating the hinge moments during the morphing process is a critical aspect of a folding wing design. Most previous studies on this problem have adopted steady-state or quasi-steady-state methods, which do not simulate the free-flying morphing process. In this study, we construct an aeroelastic flight simulation platform based on the secondary development of ADAMS software to simulate the flight-folding process of a folding wing aircraft. A flexible multibody dynamic model of the folding wing structure is established in ADAMS using modal neutral files, and the doublet lattice method is developed to generate aerodynamic influence coefficient matrices that are suitable for the flight-folding process. The user subroutine is utilized, aerodynamic loading is realized in ADAMS, and an aeroelastic flight simulation platform of a folding wing aircraft is built. On the basis of this platform, the flight-folding process of the aircraft is simulated, the hinge moments of the folding wings are calculated, and the influences of the folding rate and the aircraft’s center of gravity (c.g.) position on the results are investigated. Results show that the steady-state method is applicable to the slow folding process. For the fast folding process, the steady-state simulation errors of the hinge moments are substantially large, and a transient method is required to simulate the flight-folding process. In addition, the c.g. position considerably affects the hinge moments during the folding process. Given that the c.g. position moves aft, the maximum hinge moments of the inner and outer wings constantly increase.

Parametric Aeroelastic Modeling and Flutter Analysis for a Folding Wing

Approximate Global Mode Method for Flutter Analysis of Folding Wings

Structure Designation and Dynamic Model Analysis of Folding Wing for Underwater Vehicles

Flutter Characteristics of a Modified Z-Shaped Folding Wing Using a New Non-Intrusive Model

Aeroelastic Response of a Z-Shaped Folding Wing During the Morphing Process

Versatile Absolute Nodal Coordinate Formulation Model for Dynamic Folding Wing Deployment and Flutter Analyses

Interpolation-Based Modeling Methodology for Efficient Aeroelastic Control of a Folding Wing

Nonlinear Aeroelastic Modeling of a Folding Wing Structure

Parametric active aeroelastic control of a morphing wing using the receptance method

Experimental Flutter Analysis over Different Selected Wing Planforms by Varying the Wing Cross Section Geometry

Multi-body dynamics modeling and transient characteristics analysis for a folding wing

A co-simulation methodology to simulate the nonlinear aeroelastic behavior of a folding-wing concept in different flight configurations

Parametric Study on Supersonic Flutter of Angle-Ply Laminated Plates Using Shear Deformable Finite Element Method

Gust Response and Alleviation of Avian-Inspired In-Plane Folding Wings

Aeroelastic model and analysis of an active camber morphing wing

Calculation of the Hinge Moments of a Folding Wing Aircraft during the Flight-Folding Process

The effect of folding wingtips on the worst-case gust loads of a simplified aircraft model

The Effect of Spanwise Folding on the Aerodynamic Performance of a Passively Deformed Flapping Wing

Calculation of Hinge Moments for a Folding Wing Aircraft Based on High-Order Panel Method

Nonlinear Aeroelastic Response Analysis of Wing with Flared Folding Wingtip

ANALYTICAL MODELS,NUMERICAL SOLUTIONS AND ADVANCES IN THE STUDY OF PANEL FLUTTER