Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Construction of comprehensive experimental teaching platform for annulus convective heat transfer

Experimental research on flow resistance and heat transfer characteristics of polymer helical coils heat exchanger

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Design of heat and mass transferring simultaneously experimentation system

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Design of Experimental Platform for Exhaust Gas Recirculation Cooler Performance Test

FLOW NON-UNIFORMITY AND HEAT TRANSFER IN ANNULAR PLATE-FIN RADIATOR

Forced Convective Heat-Transfer in A Vertical Annulus Filled with Porous-Media

Numerical Simulation of Natural Convection and Calculation of Heat Transfer Coefficient in Wellbore Annulus during Deep-Water Gas Well Testing

Investigation of the Heat Transfer Performance of Multi-Borehole Double-Pipe Heat Exchangers in Medium-Shallow Strata

ICONE23-1327 A BRIEF OF THE ISCOE EXPERIMENT PLATFORM RESEARCH OBJECTIVES AND FACILITY CONSTRUCTION REQURIEMENTS

Development of virtual simulation experiment for thermal conductivity and thermal diffusivity by using plane heat source method

Experimental study on enhanced heat transfer tubes in falling film evaporation

Experimental investigation on the natural convection heat transfer in the vertical annulus of a CO2 injection well under steady-state conditions

The numerical and experimental study on characteristics of local heat transfer enhancement for the high pressure thrust chamber

Experimental and numerical analysis of heat transfer mechanisms for two-phase oil-refrigerant flow process in the cylinder of rotary compressor

Experimental And Numerical Study On The Thermal Performance Of A Water/Steam Cavity Receiver

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

High Precision Test Installation of Heat Transfer and Flow Resistance of Heat Exchangers

HEAT PERFORMANCE RESEARCH AND ECONOMICAL ANALYSIS OF SINGLE U SHAPED AND DOUBLE U SHAPED VERTICAL BOREHOLE HEAT EXCHANGER

Heat transfer characteristics in vertical tube condensers: Experimental investigation and numerical validation