Abstract:Developing ultra-high strength in rare-earth-free Mg alloys using conventional extrusion process is a great challenge. What is even more difficult is to achieve such a goal at a lower processing cost. In this work, we report a novel low-alloyed Mg-2Sn-2Ca alloy (in wt. %) that exhibits tunable ultra-high tensile yield strength (360–440 MPa) depending on extrusion parameters. More importantly, there is little drop in mechanical properties of this alloy even when it is extruded at a speed several times higher than those used in the reported high strength Mg alloys. Examination of as-extruded microstructures of this Ca-containing Mg alloy reveals that the ultra-high strength is mainly associated with the presence of surprisingly submicron matrix grains (down to ∼0.32 μm). The results suggest that the Ca addition promotes accumulations of the pyramidal dislocations, which eventually transform into the low angular grain boundaries (LAGBs). The high number density of LAGBs separate the α-Mg matrix via either discontinuous dynamic recrystallization (DDRX) mechanism in the early stage or the continuous dynamic recrystallization (CDRX) mechanism in the later stage of extrusion, which effectively enhances the nucleation rates of the DRXed grains. More importantly, large amount of Ca segregation along LAGBs, accompanied with dynamically precipitated Mg2Ca nano-phases, are detected in the present non-severely deformed samples. It is the combination of solute segregations and numerous Mg2Ca nano-precipitates that contributes to the formation of the ultra-fine grains via pinning mechanism. The ultrafine grains size, Ca enrichment in most LAGBs, and residual Mg2Ca nano-precipitates would in turn contribute significantly to the enhancement of the yield strength of the as-extruded Mg-2Sn-2Ca (wt.%) alloy. The low content of alloying elements and the fast one-step extrusion process render the present alloys low-cost and thus have great potential in large-scale industry applications.

High-strength high-ductility Mg-Al-Mn die-casting magnesium alloy containing lanthanum-cerium mixed rear earth

High-strength and high-toughness cast rare earth magnesium alloy and preparation method thereof

Deforming magnesium alloy and preparation method thereof

Yttrium-rich rare earth high-strength heat-resistant creep-resistant die-casting magnesium alloy

The Hydriding and Dehydriding Properties of Some Multicomponent Rare-Earth Magnesium Alloys

Preparation method for rare earth-magnesium alloy

Disclosing Differential Precipitation Behavior of a Novel High Mg-containing Al-Mg-Zn-Si Alloy

Effect of La Addition on Microstructure, Mechanical Behavior, Strengthening and Toughening Mechanisms of Cast Mg-Gd-Zn Alloy

Magnesium alloy and preparation method thereof

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Effect of Alloying with Al, Nd and Ca and Heat Treatment on Microstructures and Mechanical Properties of Vacuum Die-Cast AM50 Alloy

Development of low rare-earth containing magnesium alloy with high strength-ductility synergy by engineering nano-spaced lamellae

A new high-pressure die casting Mg−Gd−Sm−Al alloy with high strength-ductility synergy

Rear-earth magnesium alloy and preparation method thereof

Rare-earth aluminum alloy and preparation method thereof

High Strength Extruded Mg–5Zn–2Nd–1.5Y–0.6Zr–0.4Ca Alloy Produced by Electromagnetic Casting

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

A high-specific-strength and corrosion-resistant magnesium alloy

Low-cost and high-strength Mg-Al-Ca-Zn-Mn wrought alloy with balanced ductility

Development and characteristics of a low rare-earth containing magnesium alloy with high strength-ductility synergy

Analysis and Discussion on the Room Temperature Microstructure and Properties of High Content Mixed Rare-Earth As-Cast AZ61 Magnesium Alloy