Abstract:Developing ultra-high strength in rare-earth-free Mg alloys using conventional extrusion process is a great challenge. What is even more difficult is to achieve such a goal at a lower processing cost. In this work, we report a novel low-alloyed Mg-2Sn-2Ca alloy (in wt. %) that exhibits tunable ultra-high tensile yield strength (360–440 MPa) depending on extrusion parameters. More importantly, there is little drop in mechanical properties of this alloy even when it is extruded at a speed several times higher than those used in the reported high strength Mg alloys. Examination of as-extruded microstructures of this Ca-containing Mg alloy reveals that the ultra-high strength is mainly associated with the presence of surprisingly submicron matrix grains (down to ∼0.32 μm). The results suggest that the Ca addition promotes accumulations of the pyramidal dislocations, which eventually transform into the low angular grain boundaries (LAGBs). The high number density of LAGBs separate the α-Mg matrix via either discontinuous dynamic recrystallization (DDRX) mechanism in the early stage or the continuous dynamic recrystallization (CDRX) mechanism in the later stage of extrusion, which effectively enhances the nucleation rates of the DRXed grains. More importantly, large amount of Ca segregation along LAGBs, accompanied with dynamically precipitated Mg2Ca nano-phases, are detected in the present non-severely deformed samples. It is the combination of solute segregations and numerous Mg2Ca nano-precipitates that contributes to the formation of the ultra-fine grains via pinning mechanism. The ultrafine grains size, Ca enrichment in most LAGBs, and residual Mg2Ca nano-precipitates would in turn contribute significantly to the enhancement of the yield strength of the as-extruded Mg-2Sn-2Ca (wt.%) alloy. The low content of alloying elements and the fast one-step extrusion process render the present alloys low-cost and thus have great potential in large-scale industry applications.

High-strength and high-toughness cast rare earth magnesium alloy and preparation method thereof

Magnesium alloy and preparation method thereof

Deforming magnesium alloy and preparation method thereof

Rear-earth magnesium alloy and preparation method thereof

Preparation method for rare earth-magnesium alloy

Yttrium-rich rare earth high-strength heat-resistant creep-resistant die-casting magnesium alloy

High-strength high-ductility Mg-Al-Mn die-casting magnesium alloy containing lanthanum-cerium mixed rear earth

Study on the work-hardening behavior and tissue property analysis of high-strength magnesium alloy

Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing

Strengthening of low-cost rare earth magnesium alloy Mg-7Gd-2Y–1Zn-0.5Zr through multi-directional forging

Anti-corrosion wrought magnesium alloy containing rare earth elements and manufacturing method of anti-corrosion wrought magnesium alloy

A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion

Influence of Heat Treatment and Hot Extrusion on the Microstructure and Tensile Properties of Rare Earth Modified Mg-Zn Based Alloy

Analysis and Discussion on the Room Temperature Microstructure and Properties of High Content Mixed Rare-Earth As-Cast AZ61 Magnesium Alloy

High Strength Extruded Mg–5Zn–2Nd–1.5Y–0.6Zr–0.4Ca Alloy Produced by Electromagnetic Casting

Recent developments in rare-earth free wrought magnesium alloys having high strength: A review

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

Rare-earth aluminum alloy and preparation method thereof

Effect and Application of Rare Earth Element in Magnesium Alloys