Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Study on the effect of high-temperature dry–wet cycles on argillaceous sandstone

Cyclic heating of saturated steam changes the surface properties of sandstone

Pore-structure and Damage Behaviors of Cement Stone Subjected to Dry‒wet Cycles

Effect of wet-dry cycling on the pore characteristics of red sandstone after heat treatment

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

Experiment study of physical and mechanical properties of sandstone after variable thermal cycles

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Thermal Acoustic Emission Characteristics and Damage Evolution of Granite under Cyclic Thermal Shock

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Abnormal Variation of P-wave Velocity of Red Sandstone after Cyclical Thermal Shock in Water

Multiscale Study of the Deterioration of Sandstone in the Three Gorges Reservoir Area Subjected to Cyclic Wetting–Cooling and Drying–Heating

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Deterioration Effect of Sandstone Tensile Strength and Its Mesoscopic Mechanism under Dry-wet Cycles

Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study

THERMAL DAMAGE OF SANDSTONE AND ACOUSTIC EMISSION BASED ON BRAZILIAN SPLITTING TEST

Effect of Cyclic Thermal Shock on Granite Pore Permeability

Influence of high-temperature thermal cycles on the pore structure of red sandstone

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Deterioration of Mudstone Exposed to Cyclic Hygrothermal Conditions Based on Thermoacoustic Emission