Abstract:Cold sintering process (CSP) developed recently has attracted much attention due to the ultralow sintering temperatures and high efficiencies with the assist of transient liquid phase (TLP). Based on CSP, we have further established a protocol for low‐temperature sintering processes by combining TLP with other sintering technologies, including hybrid sintering process with microwave and TLP (MW‐TLP), and hybrid sintering process with spark plasma sintering and TLP (SPS‐TLP). Three typical electro‐ceramics (TiO2, CaWO4, and ZnO) are selected, which are highly densified (>97%) with excellent electrical properties at reduced sintering temperatures, applied pressures or holding times, demonstrating the feasibility of MW‐TLP and SPS‐TLP in fabricating electro‐ceramics. Especially, the Q × f value of TiO2 ceramics (38,020 GHz) prepared by MW‐TLP at 1000°C is 46.2% and 23.4% higher than that of microwave and spark plasma sintered samples, respectively, and comparable to traditional thermal sintered (TTS) samples at 1300–1400°C. The dielectric properties of MW‐TLP CaWO4 ceramics sintered at 900°C for 2 h are comparable to TTS samples sintered at 1000–1300°C for 2–5 h. ZnO ceramics can be highly densified (∼98%) by SPS‐TLP with mild sintering conditions (200–300°C and 3.8–50 MPa) compared to SPS (>500°C) and CSP (>100 MPa). The frameworks of fundamental mechanisms are outlined together with the experimental data. It is expected that this work will provide promising sintering methods to fabricate electro‐ceramics and offer inspirations on sintering combinations to develop low‐temperature sintering processes with high efficiencies.

Method for preparing high-conductivity zinc oxide ceramic at ultralow temperature

Remarkably Improved Electrical Conductivity of ZnO Ceramics by Cold Sintering and Post-Heat-treatment

Decreasing sintering temperature for BCZT lead-free ceramics prepared via hydrothermal route

Preparation and electric properties of dense nanocrystalline zinc oxide ceramics

Preparation and properties of InGaZn4O7 ceramic by cold sintering

Two-Step Flash Sintering of ZnO Ceramics at Room Temperature

A novel two-step cold sintering process to fabricate dense ZnO nanocrystalline ceramics

Low-Temperature Sintering of Negative–Positive-Zero-Type Temperature-Stable Ceramics with ZnO–B2O3Flux and SrCO3Additive

Regulation of oxygen vacancy and reduction of lattice thermal conductivity in ZnO ceramic by high temperature and high pressure method

Research Progress of ZnO Varistor Ceramics by Low Temperature Sintering

Synthesis of Nickel Zinc Ferrite Ceramics on Enhancing Gyromagnetic Properties by a Novel Low-Temperature Sintering Approach for LTCC Applications

An ultralow concentration of Cr2O3 dopants driven lower temperature sintering ZnO‐based varistor ceramics

Method for preparing low-oxygen titanium-zirconium-molybdenum (TZM) alloy and application

Flash Sintering of ZnO Ceramics with Combined Power Supplies at Room Temperature

Flash Sintering of ZnO Ceramics at Room Temperature with Bisectional Electrode Distributions

Hybrid low‐temperature sintering processes of electro‐ceramics

Achieving High Piezoelectricity and Excellent Temperature Stability in Pb( Zr , Ti )O 3 -Based Ceramics via Low-Temperature Sintering

Low-temperature Processing of LiZn-based Ferrite Ceramics by Co-Doping of V2O5 and Sb2O3:Composition,microstructure and Magnetic Properties

Preparation method of ultra-low-oxygen spherical micron copper powder

Synthesis of Highly Uniform and Compact Lithium Zinc Ferrite Ceramics via an Efficient Low Temperature Approach

Excellent Energy Storage Performance of ZnO Doped (pb,la)(zr,sn,ti)o3 Based Antiferroelectric Ceramics at an Ultra‐Low Sintering Temperature of 940 °C