Abstract:Cold sintering process (CSP) developed recently has attracted much attention due to the ultralow sintering temperatures and high efficiencies with the assist of transient liquid phase (TLP). Based on CSP, we have further established a protocol for low‐temperature sintering processes by combining TLP with other sintering technologies, including hybrid sintering process with microwave and TLP (MW‐TLP), and hybrid sintering process with spark plasma sintering and TLP (SPS‐TLP). Three typical electro‐ceramics (TiO2, CaWO4, and ZnO) are selected, which are highly densified (>97%) with excellent electrical properties at reduced sintering temperatures, applied pressures or holding times, demonstrating the feasibility of MW‐TLP and SPS‐TLP in fabricating electro‐ceramics. Especially, the Q × f value of TiO2 ceramics (38,020 GHz) prepared by MW‐TLP at 1000°C is 46.2% and 23.4% higher than that of microwave and spark plasma sintered samples, respectively, and comparable to traditional thermal sintered (TTS) samples at 1300–1400°C. The dielectric properties of MW‐TLP CaWO4 ceramics sintered at 900°C for 2 h are comparable to TTS samples sintered at 1000–1300°C for 2–5 h. ZnO ceramics can be highly densified (∼98%) by SPS‐TLP with mild sintering conditions (200–300°C and 3.8–50 MPa) compared to SPS (>500°C) and CSP (>100 MPa). The frameworks of fundamental mechanisms are outlined together with the experimental data. It is expected that this work will provide promising sintering methods to fabricate electro‐ceramics and offer inspirations on sintering combinations to develop low‐temperature sintering processes with high efficiencies.

Remarkably Improved Electrical Conductivity of ZnO Ceramics by Cold Sintering and Post-Heat-treatment

Improved Mechanical Properties of 3YSZ Ceramics Prepared by Pressure-less Sintering Assisted by Cold Sintering under Mild Conditions

Cold-Sintered ZnO Ceramic Composites Co-Doped with Polytetrafluoroethylene and Oxides

A novel two-step cold sintering process to fabricate dense ZnO nanocrystalline ceramics

Microstructural evolution of ZnO via hybrid cold sintering/spark plasma sintering

Recent progress of cold sintering process on functional ceramic materials

Enhancing the thermoelectric performance of cold sintered calcium cobaltite ceramics through optimised heat-treatment

Preparation and electric properties of dense nanocrystalline zinc oxide ceramics

Microstructure and thermoelectric properties of Al-doped ZnO ceramic prepared by spark plasma sintering

Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties

Improved magnetic and dielectric properties for NiZn ferrites by using cold sintering-assisted process

Hybrid low‐temperature sintering processes of electro‐ceramics

Thermal insulating performance and compressive strength of ZSM-5 zeolite ceramics by cold sintering process

Microstructure and thermoelectric properties of Zn1−xAlxO ceramics fabricated by spark plasma sintering

Cold sintering ZnO based varistor ceramics with controlled grain growth to realize superior breakdown electric field

Two-Step Flash Sintering of ZnO Ceramics at Room Temperature

Preparation and properties of InGaZn4O7 ceramic by cold sintering

Densification mechanism of ZnO ceramics prepared by cold sintering with molten zinc acetate dihydrate as the transient liquid medium

Achieving High Piezoelectricity and Excellent Temperature Stability in Pb( Zr , Ti )O 3 -Based Ceramics via Low-Temperature Sintering

Achieving superior electrical properties of PZT-PNN piezoelectric ceramics through low-temperature sintering with PbO-CuO eutectic additives

Structure and Microwave Dielectric Properties of Low-Temperature Sintered ZnO-TiO2 Ceramics