Abstract:Cyclic loading is encountered in several practical geotechnical problems. Understanding and modeling cyclic soil responses are key to engineering analysis and design. As one of the most distinct features of soils, fabric anisotropy plays an essential role in the soil response to cyclic loading, such as pore-pressure development dependent on the interplay between fabric and loading direction, effective stress path inclination related to initial fabric, and stiffness variation associated with bedding-plane orientation. However, most previous clay models developed within the bounding surface framework use the rotational angle, a stress-ratio-type scalar, to describe fabric anisotropy and its evolution, which fails to comprehensively capture the anisotropic responses. In this study, a deviatoric fabric tensor, instead of the commonly used rotational angle, was used to describe the internal microstructure within the framework of anisotropic critical state theory. A scalar-valued anisotropic fabric variable quantifying the interplay between the fabric tensor and loading direction was used to account for the impact of anisotropy on both dilatancy and strength, aimed at simulating the typical 'butterfly-shaped' stress loops, and varying rates of stiffness degradation and pore-pressure accumulation of samples with different bedding-plane directions. The initial fabric tensor was also introduced into the elastic expression to replicate the inclined undrained stress paths, as well as the variational degree and direction of inclinations due to different bedding-plane orientations. The predictive capability of the proposed model was demonstrated by simulating three typical clays in undrained and drained conditions, with varying stress and strain amplitudes. The model can capture the major influences from the initial fabric anisotropy and its evolution of clay, i.e., the typical 'butterfly-shaped' stress loops and the bedding-plane direction-dependent effective stress path, the pore-pressure generation, stiffness variation, and strain accumulation.

Bounding Surface Plasticity Model for Structured Clays Using Disturbed State Concept-Based Hardening Variables

Thermodynamics-based bounding surface model for overconsolidated clay

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Modeling of Strength and Deformation of Overconsolidated Clays Based on Bounding Surface Plasticity

A Bouding Surface Masonry Model for Structured Clays

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

Elasto-plastic Boundary Surface Model for Natural Soft Clay with Structural Damage

An anisotropic time-dependent trinal-yield-surface model for the stress-strain-time behavior of soft clay

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

A New Type of Bounding Surface Plasticity Model for Cyclic Behavior of Saturated Clay

An Elastoplastic Bounding Surface Model for the Cyclic Undrained Behaviour of Saturated Soft Clays

Anisotropic bounding surface model for clays

A Bounding Surface Model for Unsaturated Compacted Bentonite

A Simple Single Bounding Surface Model for Undrained Cyclic Behaviours of Saturated Clays and Its Numerical Implementation

On the Modeling of Anisotropy and Destructuration of Shanghai Soft Clay

Simulation of yielding and stress–stain behavior of shanghai soft clay

Elastoplastic two-surface model for clays under undrained cyclic loading

Anisotropic Bounding Surface Model for Natural Structured Clays