Abstract:In this study, a new traction‐separation based constitutive model for use in finite element simulation of masonry joints under complex loading conditions is developed for cohesive elements. The proposed model is formulated using damage parameters and plastic deformation with mutual couplings, and can accurately simulate the complex nonlinear behaviors of masonry joints considering hardening or softening of strength and stiffness degradation. To enhance the numerical stability of the model, plasticity and damage are separated algorithmically and implemented in two phases. In the first phase, the plastic deformations are treated using a multi‐surface plasticity model composed of a smooth hyperbolic yield surface for tension‐shear mixed‐mode failure and an elliptical cap primarily for the compressive failure. This is implemented in effective stress space and helps restrict the evolution of yield surfaces with no softening, significantly enhancing the efficiency of stress return mapping by the closed point projection method. In addition, an adaptive sub‐stepping scheme is adopted to further improve the robustness of the numerical implementation. In the second phase, nominal stresses are computed from the effective stresses using damage parameters. The evolution of these damage parameters is defined in terms of plastic work which is defined by a polynomial form, and is recommended in this study for a better calibration capability. Improvements are made in the formulation of compressive cap including incorporation of hardening of strength and stiffness degradations as these are ignored in existing interface models. This approach helped improve simulation of masonry under cyclic loads with tension‐compression transitions. For the structural level applications, the interface model is implemented within a finite element program, which is utilized to simulate failure of a number of masonry specimens under in‐plane/out‐of‐plane monotonic/cyclic loading. The simulated results are rigorously validated with existing experimental data that shows a good potential in modeling masonry structures.

A Bouding Surface Masonry Model for Structured Clays

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

Thermodynamics-based bounding surface model for overconsolidated clay

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

STZ-Clay: A Shear-Transformation-zone Theory Based Constitutive Model for Clay

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

An Egg-Shaped Elastic Viscoplastic Model for Clay: Experimental Investigation and Constitutive Modelling

An anisotropic time-dependent trinal-yield-surface model for the stress-strain-time behavior of soft clay

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

Constitutive Modelling of the Shakedown Response of Sensitive Clay to Undrained Long-Term Cyclic Loads Incorporating Structural Destruction

Discrete-element Method Modelling of Structural Clay

Deformation mechanism and constitutive relation of soft soils

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Slip-enhanced plastic-damage constitutive model for masonry structures

An Updated Elastoplastic Damage Model for Structural Soft-Clays

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand