Abstract:Cyclic loading is encountered in several practical geotechnical problems. Understanding and modeling cyclic soil responses are key to engineering analysis and design. As one of the most distinct features of soils, fabric anisotropy plays an essential role in the soil response to cyclic loading, such as pore-pressure development dependent on the interplay between fabric and loading direction, effective stress path inclination related to initial fabric, and stiffness variation associated with bedding-plane orientation. However, most previous clay models developed within the bounding surface framework use the rotational angle, a stress-ratio-type scalar, to describe fabric anisotropy and its evolution, which fails to comprehensively capture the anisotropic responses. In this study, a deviatoric fabric tensor, instead of the commonly used rotational angle, was used to describe the internal microstructure within the framework of anisotropic critical state theory. A scalar-valued anisotropic fabric variable quantifying the interplay between the fabric tensor and loading direction was used to account for the impact of anisotropy on both dilatancy and strength, aimed at simulating the typical 'butterfly-shaped' stress loops, and varying rates of stiffness degradation and pore-pressure accumulation of samples with different bedding-plane directions. The initial fabric tensor was also introduced into the elastic expression to replicate the inclined undrained stress paths, as well as the variational degree and direction of inclinations due to different bedding-plane orientations. The predictive capability of the proposed model was demonstrated by simulating three typical clays in undrained and drained conditions, with varying stress and strain amplitudes. The model can capture the major influences from the initial fabric anisotropy and its evolution of clay, i.e., the typical 'butterfly-shaped' stress loops and the bedding-plane direction-dependent effective stress path, the pore-pressure generation, stiffness variation, and strain accumulation.

A New Type of Bounding Surface Plasticity Model for Cyclic Behavior of Saturated Clay

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

Thermodynamics-based bounding surface model for overconsolidated clay

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

A Bounding-Surface-based Cyclic "P-Y Plus M-θ" Model for Unified Description of Laterally Loaded Piles with Different Failure Modes in Clay

Constitutive modeling for cyclic responses of saturated soft clay under principal stress rotation induced by wave loads

STUDY ON ACCUMULATIVE PLASTIC STRAIN MODEL OF SOFT CLAY UNDER CYCLIC LOADING

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

An anisotropic time-dependent trinal-yield-surface model for the stress-strain-time behavior of soft clay

Study on Dynamic Stress-Strain Relationship of Soft Clay Based on Modified Iwan's Model under Undrained Cyclic Loading

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Modeling Of Stress-Strain Behavior Of Soft Clay Under Cyclic Loading

EXPERIMENTAL RESEARCH ON CHANGING RULES OF DYNAMIC MODULUS AND DAMPING RATIO OF SATURATED SOFT CLAY UNDER BIDIRECTIONAL EXCITING CYCLIC LOADING

Strain Degradation Model for Anisotropic Soft Clay under Cyclic Loading

Cyclic Softening-Pore Pressure Generation Model For Overconsolidated Clay Under Cyclic Loading

Undrained cyclic shear strength and stiffness degradation of overconsolidated soft marine clay in simple shear tests

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Cyclic Behavior of Saturated Soft Clay under Stress Path with Bidirectional Shear Stresses