Abstract:A volumetric Wankel steam expander has numerous advantages over other positive displacement machines as an expansion device due to its high power to weight ratio, compactness, lower noise, vibration, and potentially lower specific cost making them a favourable choice over reciprocating expanders. Pressure drop of steam during admission through rotary valves, is inevitable across the intake manifold of the expander during admission duration. These pressure losses during intake, changes the design pressure ratio across the actual expander, which leads to a reduced power output by a reasonable margin of 20 to 30%. Therefore, it is crucial to reduce it to improve the net power output. The goal of the present research is twofold. In the first part, the pressure losses across the intake manifold of the expander is estimated for an existing rectangular port geometry. In the second part, a trapezoidal port profile of same hydraulic diameter is designed for the intake manifold with an aim to reduce the intake losses, thereby delivering a higher power output. The thermodynamic analysis is carried out for the theoretical pressure-volume cycle of the expander using Python 3.8 and the obtained data are fed into the developed CFD model on the intake manifold in ANSYS Fluent 19.2. The boundary conditions are obtained from the aforementioned thermodynamic model, and the state point values are obtained from the REFPROP database. It is observed that the trapezoidal port significantly reduces the pressure losses by a margin of around 50%, thereby delivering around 7 to 21% higher net power output and a increment of isentropic efficiency by a margin of 14% over a range of rotational speed varying from 1200 to 3000 RPM. Further investigations are conducted to study the effect of different fluid flow and turbulent parameters on the pressure loss, power output and isentropic efficiency of the expander.

Impact of Discharge Port Configurations on the Performance of Sliding Vane Rotary Compressors with a Rotating Cylinder

Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

Performance Investigation and Design Optimization of Novel Rotating-Cylinder Sliding Vane Rotary Compressors

Novel Rotary Sliding Vane Expanders with Small Eccentricity and Guide Vane Ports: Numerical Simulation and Structural Parameter Analysis

Dynamic modeling and characteristics analysis of sliding vane in a high-speed rotary compressor considering groove distribution and multi-body coupling

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

Investigation of Discharge Valve in Ultra-High-speed Rotary Compressors: an Experimental and FSI Simulation-Based Study

Bleed air CFD modelling in aerodynamic simulation of A heavy duty gas turbine compressor

Performance Improvement of a Centrifugal Compressor by a Variable Low Solidity Diffuser

Effects Of Tip Clearance Size On The Performance And Tip Leakage Vortex In Dual-Rows Counter-Rotating Compressor

Analytical Grid Generation and Numerical Assessment of Tip Leakage Flows in Sliding Vane Rotary Machines

Numerical Investigation on Indicated Power and Discharge Process of Three Different Discharge Methods of Swing Compressor

Numerical Simulation for Flow of Rolling Piston Type of Rotary Compressor

Performance investigation and optimization analysis for vapor injection rotary compressor oriented to circular end-plate injection port without check valve

The Theoretical and Experimental Research of a Novel Rotary Cylinder Compressor

The Influence of Flow Passage Geometry on the Performances of a Supercritical CO2 Centrifugal Compressor

INFLUENCE OF ADJUSTABLE INLET GUIDE VANES ON THE PERFORMANCE CHARACTERISTICS OF A SHROUDED CENTRIFUGAL COMPRESSOR

Influence of Height and Pitch of Profile on Designing Discharge Port for Scroll Compressor

Investigating a hermetic reciprocating compressor performance under variable lift limiter height using FSI method

Numerical Study on the effect of port geometry of intake manifold in a Steam Wankel Expander

Impact of Slots on the Aerodynamic Performance of the Variable Inlet Guide Vane Cascade of a Centrifugal Compressor