Abstract:To purify and recycle the low-carbon alcohols and acids in wastewater by a green method with high efficiency is of great significance in chemical engineering process, such as indirect coal liquefaction (Fischer Tropsch Synthesis, FTS), which produces a large amount of alcohol and acid-containing wastewater. Adsorption-desorption of low-carbon alcohols and acids in wastewater by activated carbon is a promising method for industrial application. The adsorption capacity of low-carbon alcohols and acids in activated carbons is closely related with their pore and surface properties. However, this was seldom studied due to the complex properties of carbon materials with different pore size, distribution and volume, as well as surface area and hydrophobicity. In this work, four commercial activated carbon materials (AC1 ∼ 4) with similar hydrophobicity and different pore and surface structure were chosen to explore the possible correlation of the adsorption capacity of C1-5 alcohols, C2-4 acids and FTS modeling wastewater. The batch method was used to investigate the adsorption capacity of AC1 ∼ 4 on low-carbon alcohols and acids as well as FTS modeling wastewater; while density functional theory (DFT) calculation was performed to investigate the adsorption energies of low-carbon alcohols and acids in carbon nanotubes with different pore sizes. Both the experimental and theoretical results indicate that the adsorption capacities of methanol, ethanol and acetic acid are strongly dependent on the ultra-micropores (<0.9 nm) due to their small molecular weight; and the adsorption capacity of pentanol is mainly determined by the surface areas due to its relatively high molecular weight and low polarity; while the adsorption capacities of C3-C4 alcohols and acids are well correlated with the microporous volume and surface area. In addition, and the adsorption capacities of acids were also related with the content of surface COOH species. AC2 has the highest adsorption capacity of mixed low-carbon alcohols and acids (196.2 mg/g) in FTS modeling wastewater due to its abundant ultra-micropore and high specific surface area. This work sheds light into the development of adsorbents with high adsorption capacity of low-carbon alcohols and acids, and provides solid experimental and theoretical support in the further purification of FTS wastewater and recovery of valuable chemicals.

Modified Activated Carbon by Air Oxidation As a Potential Adsorbent for Furfural Removal

Furfural Wastewater Decolorization with Activated Carbon Prepared by Furfural Residues

Characterization and analysis of activated carbons prepared from furfural residues by microwave-assisted pyrolysis and activation

Activated carbon derived from hawthorn kernel waste for rapid adsorption of fungicides

Experimental and theoretical study of the adsorption of mixed low carbon alcohols and acids from Fischer Tropsch synthesis wastewater by activated carbon

Adsorption of Fulvic Acid on Mesopore-Rich Activated Carbon with High Surface Area

Comparison and analysis of one- and two-step activation for preparation of activated carbon from furfural residues

Efficient removal of acetic acid by a regenerable resin-based spherical activated carbon.

Understanding evolution of the products and emissions during chemical activation of furfural residue with varied potassium salts

FeOCl-confined Activated Carbon for Improving Intraparticle Fenton-like Oxidation Regeneration

Adsorption removal of cyclopentanol generated from Fenton oxidation treatment industrial wastewater process with activated carbon fiber cloths

Activated Carbons Chemically Modified by Concentrated H2so4 for the Adsorption of the Pollutants from Wastewater and the Dibenzothiophene from Fuel Oils

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

Activated carbon fibers as an excellent partner of Fenton catalyst for dyes decolorization by combination of adsorption and oxidation

Removal of volatile organic compounds from the coal-fired flue gas by adsorption on activated carbon

Activated Carbon Assisted Fenton-like Treatment of Wastewater Containing Acid Red G

The Impact of N/O-Functional Groups on the Sorption Capabilities of Activated Carbons Derived from Furfuryl Alcohol

Nano-magnetically modified activated carbon prepared by oak shell for treatment of wastewater containing fluoride ion

Activated carbons modified by oxidation remove sulfadiazine from aqueous phase

Removal of bromate from water using modified activated carbon

Preparation of Fluoride Adsorbent by Resource Utilization of Carbide Slag from Industrial Waste