Abstract:The review is devoted to the use of impregnated activated carbon materials as chemisorbents of sulfur (IV) oxide. General methods for obtaining ordinary activated carbon, preparation of raw materials, their chemical activation with alkalis and acids followed by heat treatment (carbonization) in an inert environment or in the presence of a gaseous oxidizer, the role of acid-base and redox catalysts in this process are considered. The influence of the chemical composition of the activated carbon surface, the presence of functional groups, and their acid-base properties, as well as the products of surface reactions on the peculiarities of sulfur (IV) oxide adsorption is analyzed from the point of view of SO2 removal efficiency and the possibility of SO2 regeneration. An important role in these processes is played by the pore size, the possibility of co-adsorption of water, and the presence of an oxidant. The nature of adsorbent-adsorbate interactions on the surface of activated carbon, their energy, in particular, the contribution of so-called "physical" adsorption, van der Waals forces, hydrogen bonding, and the influence of surface functional groups are discussed. The activation of carbon raw materials with nitrogen-containing compounds leads to the N-doping of the surface, which increases the efficiency of SO2 adsorption, facilitating not only van der Waals and electrostatic interactions, but also S←N binding. The influence of oxygen and oxygen-containing functional groups on SO2 adsorption is also discussed. To obtain impregnated activated carbon for SO2 absorption, the original activated carbon of the required quality is impregnated with solutions of inorganic and organic compounds that remain on the inner surface of the activated carbon after drying. Impregnation blocks partly the porosity of activated carbon, but makes it more capable of chemical adsorption. Chemisorption, in which certain chemical bonds are formed between the surface of the activated carbon and the compound being adsorbed, is more selective than physical adsorption, where the size of molecules is critical for an effective capture process. It can be noted that unlike inorganic alkalis, which spoil the porous structure of activated carbon, treatment with a solution of ammonia or organic N-containing bases promotes SO2 absorption. A special place in gas purification is occupied by activated carbon impregnated with ionic liquids, non-aqueous solvents being used for impregnation. A separate issue of the chemisorption of sulfur (IV) oxide by samples of impregnated activated carbon based on d-metals will be discussed in detail below.

Activated carbons modified by oxidation remove sulfadiazine from aqueous phase

Effect of Oxidation Treatment on the Adsorption and the Stability of Mercury on Activated Carbon.

Activated carbon with excellent chromium(VI) adsorption performance prepared by acid–base surface modification

Co-carbonization of Biomass and Oily Sludge to Prepare Sulfamethoxazole Super-Adsorbent Materials.

Effect of Oxide Presence in Activated Carbon on Arsenic Removal

Improving the performance of activated carbon towards dibenzothiophene adsorption by functionalization and sulfur-metal interactions

Adsorption of Pharmaceuticals to Microporous Activated Carbon Treated with Potassium Hydroxide, Carbon Dioxide, and Steam.

Improvement of oxygen-containing functional groups on olive stones activated carbon by ozone and nitric acid for heavy metals removal from aqueous phase

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Aortic stump tailoring with GRF glue and a felt strip

Adsorption of Benzene and Methyl-Ethyl-ketone Vapors at Low Concentration by Wet Oxidized Porous Carbons

Strengthened removal of emerging contaminants over S/Fe codoped activated carbon fabricated by a mild one-step thermal transformation scheme

A facile method to fabricate AC/CuO for efficient removal of organic pollutants by adsorption and persulfate-based advanced oxidation processes

Enhanced Removal of Sulfonamide Antibiotics by KOH-activated Anthracite Coal: Batch and Fixed-Bed Studies.

Manganese oxide–loaded activated carbon for ammonium removal from wastewater: the roles of adsorption and oxidation

Nitrogen-doped iron carbide composites for activating peroxymonosulfate to degrade sulfonamides

Activated carbon fiber mediates efficient activation of peroxymonosulfate systems: Modulation of manganese oxides and cycling of manganese species

IMPREGNATED ACTIVATED CARBON MATERIALS FOR RESPIRATORY PURPOSE. CHEMISORPTION OF SULFUR DIOXIDE

The Effects of Chemical Oxidation and High-Temperature Reduction on Surface Functional Groups and the Adsorption Performance of Biochar for Sulfamethoxazole Adsorption

Adsorption characteristics of SO2 onto novel activated carbon fixed bed: kinetics, isotherms, thermodynamics and washing regeneration

Microbially-mediated synthesis of activated carbon derived from cottonseed husks for enhanced sulfanilamide removal