Abstract:To purify and recycle the low-carbon alcohols and acids in wastewater by a green method with high efficiency is of great significance in chemical engineering process, such as indirect coal liquefaction (Fischer Tropsch Synthesis, FTS), which produces a large amount of alcohol and acid-containing wastewater. Adsorption-desorption of low-carbon alcohols and acids in wastewater by activated carbon is a promising method for industrial application. The adsorption capacity of low-carbon alcohols and acids in activated carbons is closely related with their pore and surface properties. However, this was seldom studied due to the complex properties of carbon materials with different pore size, distribution and volume, as well as surface area and hydrophobicity. In this work, four commercial activated carbon materials (AC1 ∼ 4) with similar hydrophobicity and different pore and surface structure were chosen to explore the possible correlation of the adsorption capacity of C1-5 alcohols, C2-4 acids and FTS modeling wastewater. The batch method was used to investigate the adsorption capacity of AC1 ∼ 4 on low-carbon alcohols and acids as well as FTS modeling wastewater; while density functional theory (DFT) calculation was performed to investigate the adsorption energies of low-carbon alcohols and acids in carbon nanotubes with different pore sizes. Both the experimental and theoretical results indicate that the adsorption capacities of methanol, ethanol and acetic acid are strongly dependent on the ultra-micropores (<0.9 nm) due to their small molecular weight; and the adsorption capacity of pentanol is mainly determined by the surface areas due to its relatively high molecular weight and low polarity; while the adsorption capacities of C3-C4 alcohols and acids are well correlated with the microporous volume and surface area. In addition, and the adsorption capacities of acids were also related with the content of surface COOH species. AC2 has the highest adsorption capacity of mixed low-carbon alcohols and acids (196.2 mg/g) in FTS modeling wastewater due to its abundant ultra-micropore and high specific surface area. This work sheds light into the development of adsorbents with high adsorption capacity of low-carbon alcohols and acids, and provides solid experimental and theoretical support in the further purification of FTS wastewater and recovery of valuable chemicals.

Adsorption of Fulvic Acid on Mesopore-Rich Activated Carbon with High Surface Area

Simultaneous adsorption of fulvic acid and organic contaminants by KOH activated mesoporous biochar with large surface area

Reduced Mobility of Fomesafen Through Enhanced Adsorption in Biochar-Amended Soil.

Adsorption of Fulvic Acid by Carbon Nanotubes from Water.

Characterization and analysis of activated carbons prepared from furfural residues by microwave-assisted pyrolysis and activation

Enhanced Adsorption Of Humic Acids On Ordered Mesoporous Carbon Compared With Microporous Activated Carbon

Nanodisk–like activated carbon-branched polyamine for adsorption and degradation of gaseous formaldehyde

Adsorption and correlations of selected aromatic compounds on a KOH-activated carbon with large surface area

Correlations and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Activated Carbons

Toward systematic understanding of adsorptive removal of legacy and emerging per-and polyfluoroalkyl substances (PFASs) by various activated carbons (ACs)

Bamboo-Derived Low-Cost Mesoporous Biochar for Efficient Removal of Per- and Polyfluoroalkyl Substances from Contaminated Water

Enhancement effect of potassium ferrate on self-activation: Significant improvement in pore structure and adsorption performance of activated carbon

Assessment of activated carbon as a sorbent amendment for immobilizing perfluoroalkyl acids for surface sediment remediation

Effect of Fulvic Acid Coating on Biochar Surface Structure and Sorption Properties Towards 4-Chlorophenol.

Surface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils

Activated Carbon Application Simultaneously Alleviates Paddy Soil Arsenic Mobilization and Carbon Emission by Decreasing Porewater Dissolved Organic Matter

Enhanced Adsorption of Perfluorooctane Sulfonate and Perfluorooctanoate by Bamboo-Derived Granular Activated Carbon.

Synthesis of Iron Oxide Nanoparticle Functionalized Activated Carbon and Its Applications in Arsenic Adsorption

Activated carbon prepared by co-pyrolysis of waste tobacco straw and waste LDPE mulch film: characterization and application for methylene blue removal

Physicochemical and adsorption characteristics of activated carbons from cellulose, xylan and lignin

Experimental and theoretical study of the adsorption of mixed low carbon alcohols and acids from Fischer Tropsch synthesis wastewater by activated carbon