Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Design of Hollow Core Step-Index Antiresonant Fiber with Stepped Refractive Indices Cladding

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Low bending loss few-mode hollow-core anti-resonant fiber with glass-sheet conjoined nested tubes

Simulation of the Structural Parameters of Anti-resonant Hollow-core Photonic Crystal Fibers

Design and Study of Low Loss, High Birefringence Quasi-Symmetric Hollow-Core Anti-Resonant Fiber

High birefringence, single-polarization, low loss hollow-core anti-resonant fibers

Single-mode bend-resistant hollow-core fiber with multi-size anti-resonant elements

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

Broadband high birefringence and single-polarization hollow-core anti-resonant fibers with an elliptical-like core

Single-polarization single-mode broadband ultra-low loss hollow-core anti-resonant fiber with nested double C-type cladding tubes

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Highly Birefringent Anti-Resonant Hollow-Core Fiber With a Low Loss

Single-Polarization and Single-Mode Hybrid Hollow-Core Anti-Resonant Fiber Design At 2 μM

Enhanced birefringence in conventional and hybrid anti-resonant hollow-core fibers

Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Design and fabrication of a tellurite hollow-core anti-resonant fiber for mid-infrared applications

Epsilon negative-based, broadband single-polarization single-mode hollow core anti-resonant photonic crystal fiber

Nested hollow-core anti-resonant fiber with elliptical cladding for 2 μm laser transmission