Abstract:Adding hydrogen to natural gas is a promising way to improve the ignition stability and reduce the greenhouse gas emissions of pilot-ignition direct-injection natural gas engines. Most of the previous studies concerning hydrogen-enriched natural gas engines are focused on spark-ignition engines. The limited investigations on the addition of hydrogen in direct-injection natural gas engines are conducted by experimental method. Therefore, some detailed information on the in-cylinder combustion and emission formation process are left unknown. In this work, numerical simulations have been performed for the combustion process of a pilot-ignition direct-injection natural gas engine based on an integrated mechanism which is capable of describing the chemical kinetics involving diesel, natural gas, and hydrogen. Three-dimensional (3D) computational fluid dynamics simulations were conducted at different hydrogen blend ratios to explore the effects of hydrogen addition on the whole combustion process and the mole fraction traces of small radicals as well as CO, NOx, and soot emissions. Hydrogen addition was achieved by both volume-equivalent principle and energy-equivalent principle to guide the choice of hydrogen-addition method. Zero-dimensional simulations were conducted to elaborate the explanations of the phenomena in 3D simulations and disclose the interactions among the sensitivity of the key reactions, the formation of the active radicals, and the heat release process. The results show that the ignition delay is shortened and the ignition of natural gas is enhanced with the increase of hydrogen addition, which is primarily caused by the enhanced reactions related to active small radicals induced by increased hydrogen concentration. When hydrogen is added based on the volume-equivalent principle, all emission values will reduce with little sacrifice on thermal efficiency at hydrogen blend ratios smaller than 20%. However, CO emissions experience an increasing trend when hydrogen blend ratio is further increased to higher than 20% while NOx and soot emissions retain the decreasing trend. When hydrogen is added based on the energy-equivalent principle, CO emissions and soot emissions will decrease with the increase of hydrogen blend ratio while NOx emissions will witness an opposite trend with considerable improvements in thermal efficiency.

Effect of ignition timing and hydrogen injection phase on HDI engine combustion and NOx emissions

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Comprehensive effects of ammonia substitution rate, compression ratio, and ignition timing on knock, NOx emissions and indicated thermal efficiency in a hydrogen fuel engine

Effect of Timing Strategy on Mixture Formation, Performance and Emission of Inlet Injection Hydrogen Engine

Effects of hydrogen injection timing and injection pressure on mixture formation and combustion characteristics of a hydrogen direct injection engine

Effect of ignition timing and hydrogen fraction on combustion and emission characteristics of natural gas direct-injection engine

Study of Single and Split Injection Strategies on Combustion and Emissions of Hydrogen DISI Engine

Experimental study on the combustion and emission performance of the hydrogen direct injection engine

An experimental investigation on the lean-burn characteristics of a novel hydrogen fueled spark ignition engine: Hydrogen injection via a micro-hole on the spark plug

Comprehensive Comparison of Single-Stage and Novel Two-Stage Hydrogen Direct Injection Strategies on the Combustion and Thermodynamic Performance of X-type Rotary Engine Using Gasoline-Hydrogen Fuel

Experimental Study on the Impact of Hydrogen Injection Strategy on Combustion Performance in Internal Combustion Engines

Impact of hydrogen direct injection on engine combustion and emissions in a GDI engine

Experimental Analysis and Optimization of the Variable Valve Timing on Attaining High Efficiency with Low NOx Emission of a Direct-Injected Hydrogen Engine

Effect of Fuel Injection Timings and Hydrogen Fraction on Combustion Characteristics of Direct-Injection Engine

Effects of Hydrogen Addition on the Performance of a Pilot-Ignition Direct-Injection Natural Gas Engine: A Numerical Study

Experimental Study on Performance and Emission of an Electric Turbocharged Hydrogen Direct Injection Engine

Effects of hydrogen addition in intake air on combustion and emission of diesel engines

Direct injection of hydrogen main fuel and diesel pilot fuel in a retrofitted single-cylinder compression ignition engine

Effect of Injection and Ignition Strategy on an Ammonia Direct Injection - Hydrogen Jet Ignition (ADI-HJI) Engine