Abstract:Ammonia, as a promising green fuel for achieving carbon neutrality and zero-carbon emissions, encounters obstacles in practical engine applications due to its intrinsic combustion properties like low burning velocity and high autoignition temperature. Hydrogen-assisted pre-chamber turbulent jet ignition (TJI) technology has recently demonstrated great potential in extending the lean limits and enhancing the stability of ammonia combustion. As such, this study conducts a comprehensive analysis on the flame development and emission formation processes under the active pre-chamber TJI mode fueled with ammonia and hydrogen using computational fluid dynamics (CFD) modeling integrated with detailed chemical kinetics, particularly focusing on the effects of hydrogen energy ratio and spark timing. It is found that the active ammonia-hydrogen TJI engine is typically characterized by four primary physical processes involving H2 mixture preparation in the pre-chamber, flame kernel formation and development within the pre-chamber, the formation and ejection of hot jet across the orifices, and the turbulent flame initiation and propagation in the main chamber. Hydrogen injection holds a scavenging effect on the residuals in the pre-chamber while forms fuel stratification near the spark plug, enhancing the ignition stability. Besides, the current combustion mode is commonly characterized by two-stage heat release in the main chamber, but exhibits a three-stage heat release as increasing the premixed H2 ratio. The first stage is dominated by a hot jet flame, the second stage is characterized by turbulent flame propagation or autoignition, and the third stage is induced by a secondary jet ejected from the pre-chamber, which becomes more prominent as the H2 ratio increases. Hydrogen blending could not only facilitate the turbulent flame propagation of NH3-air mixture in the main chamber but also enhance the initiation of flame kernel in the pre-chamber, thereby promoting the overall combustion process and potentially improving the thermal efficiency. The N2O emission is produced in two distinct stages, wherein N2O is generated and undergoes conversion during the main combustion phase, while unburned crevice gases mix with burned gases and convert into N2O during the expansion stroke. Increasing the premixed hydrogen ratio leads to an increased in-cylinder temperature, which in turn facilitates a reduction in N2O emissions and mitigates unburned ammonia. Furthermore, optimization of the spark timing is required after implementing the hydrogen addition into the intake manifold to achieve desirable combustion phasing and further improve the thermal efficiency. Finally, a novel combustion concept, denoted as TJI assisted compression ignition mode, is proposed for achieving high thermal efficiency in ammonia engines via adopting high compression ratio and premixed ammonia-hydrogen charge under the TJI strategy.

Effect of Injection and Ignition Strategy on an Ammonia Direct Injection - Hydrogen Jet Ignition (ADI-HJI) Engine

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Numerical investigation of ammonia-rich combustion produces hydrogen to accelerate ammonia combustion in a direct injection SI engine

Numerical investigation of multiple hydrogen injection in a jet ignition ammonia-hydrogen engine

Investigation of Low Carbon Emission and High Thermal Efficiency of Diesel Engine Combined with High-Pressure Direct Injection of Hydrogen Carrier: Ammonia

Ammonia Combustion Using Hydrogen Jet Ignition (AHJI) in Internal Combustion Engines

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Numerical Simulation of Ammonia-Hydrogen Engine Using Low-Pressure Direct Injection (LP-DI)

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine

Computational Insights into Flame Development and Emission Formation in an Ammonia Engine with Hydrogen-Assisted Pre-Chamber Turbulent Jet Ignition

Experimental investigation on in-cylinder working process and thermal efficiency of ammonia/diesel low-carbon engine with pre-injection strategy

Effects of Pre-Injection Strategy on Combustion Characteristics of Ammonia/Diesel Dual-Fuel Compression Ignition Mode

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Study on Combustion and Emission Performance of Dual Injection Strategy for Ammonia/Hydrogen Dual-Fuel Engine

Performance characteristics of a two-stroke low speed engine applying ammonia/diesel dual direct injection strategy

Influence of Hydrogen on the Performance and Emissions Characteristics of a Spark Ignition Ammonia Direct Injection Engine

Effects of Ammonia Energy Fractions, Diesel Injection Timings, and Loads on Combustion and Emission Characteristics of PFI-DI Ammonia-Diesel Engines

Effects of Ammonia Energy Fraction and Diesel Injection Timing on Combustion and Emissions of an Ammonia/Diesel Dual-Fuel Engine

A quantitative study on the combustion and emission characteristics of an Ammonia-Diesel Dual-fuel (ADDF) engine

Study on marine engine combustion and emissions characteristics under multi-parameter coupling of ammonia-diesel stratified injection mode

Experimental Investigation on the Performance of Pure Ammonia Engine Based on Reactivity Controlled Turbulent Jet Ignition