Abstract:Next-generation wireless standards (e.g., WiFi-7) advancing towards wider bandwidth and higher order modulation require ADCs with GHz sampling rates and over 12b resolution. Although conventional pipelined ADCs can satisfy the speed and resolution specifications, their power is usually too high for handset applications, for which $\leq 10\text{mW}$ per channel is desired. Alternatively, time-interleaved (TI) ADCs achieve low power by harnessing efficient low-speed SAR sub-ADCs. However, background timing-skew calibrations bring considerable overhead and place limitations on the input signal. The pipeline/TI-SAR hybrid architecture places the interleaved SAR at the $2^{\text{nd}}$ pipeline stage to avoid the timing skew problem [1]. As the SAR consumes low power and can run asynchronously, this greatly reduces the pipeline backend power and simplifies the clock distribution. However, the residue amplifier is still a power efficiency bottleneck as in a conventional pipeline. In [1], the architecture advantages are shaded by its power-hungry telescopic OTA. This work proposes a ring amplifier with split MDAC to boost the efficiency of the pipelined TI-SAR architecture, which enables a 1GS/s 10-ENOB ADC which consumes only 6.9mW. For high-speed ADCs, the power and area overhead of the reference buffer is also a critical issue. This work proposes a reference decoupling capacitor (de-cap) switching technique that reduces the reference buffer power to only 3.7mW, and the total de-cap size to only 44pF, while maintaining excellent high-frequency performance. Overall, this work achieves $\text{FoM}_{\mathrm{s}}$ of 171.1 and 169.2dB with or without the reference buffer, which outperforms all reported works with $\mathrm{f}_{\mathrm{s}} > 600\text{MS}/\mathrm{s}$ .

A Power-Efficient 13-Tap FIR Filter and an IIR Filter Embedded in a 10-Bit SAR ADC

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 10 MS/s 10 bit SAR A/D Converter in RF System

28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter

A Fully-Dynamic Time-Interleaved Noise-Shaping SAR ADC Based on CIFF Architecture.

The Design and Implementation of Fir Filter Based on Improved Da Algorithm

17.5 A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

An optimal filter with optional resolution used in incremental ADC for sensor application

A 20mhz Bandwidth Band-Pass Noise-Shaping SAR ADC with OPAMP Sharing Switched-Capacitor Filter

Low Power Design For Fir Filter

A 13-Bit 0.005-Mm2 40-Ms/s SAR ADC with Kt/c Noise Cancellation

A Continuous-Time Digital IIR Filter with Signal-Derived Timing and Fully Agile Power Consumption

A 14b 500 MS/s Single-Channel Pipelined-SAR ADC With Reference Ripple Mitigation Techniques and Adaptively Biased Floating Inverter Amplifier

A 14-Bit Hybrid Analog-to-Digital Converter for Infrared Focal Plane Array Digital Readout Integrated Circuit

A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor.

A Bandwidth-Adaptive Pipelined SAR ADC with Three-Stage Cascoded Floating Inverter Amplifier.

Low Power and High Speed Designs of CIC Filter for Sigma-Delta ADCs

A Fully Dynamic Low-Power Wideband Time-Interleaved Noise-Shaping SAR ADC

A 12-bit 200KS/s SAR ADC with a mixed switching scheme and integer-based split capacitor array