Abstract:Inconel 718 is a nickel-iron based superalloy widely used in the aerospace industry. Its high temperature strength is attributed to the thermal stability of dense nanoscale precipitates ${\ensuremath{\gamma}}^{\ensuremath{'}}$ $[{\mathrm{Ni}}_{3}\mathrm{Al}]$ and ${\ensuremath{\gamma}}^{\ensuremath{''}}$ $[{\mathrm{Ni}}_{3}\mathrm{Nb}]$. There is experimental evidence that ${\ensuremath{\gamma}}^{\ensuremath{'}}$ and ${\ensuremath{\gamma}}^{\ensuremath{''}}$ often form co-precipitates ${\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}}$ or sandwichlike structure ${\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}}∕{\ensuremath{\gamma}}^{\ensuremath{'}}$ or ${\ensuremath{\gamma}}^{\ensuremath{''}}∕{\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}}$. But how they stabilize under heat treatment or in service is still not well-understood. We have investigated the interfacial structure and chemistry of fine co-precipitates ${\mathrm{Ni}}_{3}(\mathrm{Al},\mathrm{Ti},\mathrm{Nb})∕{\mathrm{Ni}}_{3}\mathrm{Nb}({\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}})$ in Inconel 718, using both first-principles density functional theory calculation and the three-dimensional atom probe technique. Our calculations confirm that Al atoms in the ${\ensuremath{\gamma}}^{\ensuremath{'}}$ phase segregate to the ${\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}}$ interface. The enrichment of Al helps to impede the assimilation of Nb from ${\ensuremath{\gamma}}^{\ensuremath{'}}$ to ${\ensuremath{\gamma}}^{\ensuremath{''}}$ and reject Al from ${\ensuremath{\gamma}}^{\ensuremath{''}}$ to ${\ensuremath{\gamma}}^{\ensuremath{'}}$, and therefore keeps such secondary precipitates at fine size. In the absence of Ti in the ${\ensuremath{\gamma}}^{\ensuremath{'}}$ phase, our calculations predict an enhanced driving force for Al to accumulate at the interface. We have also characterized the microstructure of the ${\ensuremath{\gamma}}^{\ensuremath{'}}∕{\ensuremath{\gamma}}^{\ensuremath{''}}$ interface for an Inconel 718 sample taken from a commercial compressor blade serviced in an airplane engine for over $10\phantom{\rule{0.2em}{0ex}}000\phantom{\rule{0.3em}{0ex}}\mathrm{h}$ at a temperature up to $600\phantom{\rule{0.2em}{0ex}}\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ using three-dimensional atom probe analysis. Interestingly, we find that Al enrichment sustains long-term service, suggesting that the coarsening of secondary precipitates is interface-controlled. The success of first-principles density functional theory computation in reproducing the experimental observation encourages extensive application of this powerful tool in the study of precipitates in superalloys.

Characterization of Precipitation in Gradient Inconel 718 Superalloy

Study of Pre-Precipitated Δ Phase Promoting Deformation Twinning and Recrystallization Behavior of Inconel 718 Superalloy During Hot Compression

Precipitation kinetics of γ ′ and γ ′′ particles in Inconel 718 and its influence on mechanical properties

Thermal Stability of Nanocrystalline Gradient Inconel 718 Alloy

Precipitation behavior during high-temperature isothermal compressive deformation of Inconel 718 alloy

Evaluation on static mechanical stability of wrought Inconel 718 superalloy; effect of grain configuration and δ precipitation

Effect of two-step solid solution on microstructure and δ phase precipitation of Inconel 718 alloy

Precipitation of δ phase in Inconel 718 superalloy: The role of grain boundary and plastic deformation

On the Deformation Induced Heterogeneous Precipitation of Γ″ Phase in Inconel 718 Alloy

Isothermal Solid‐State Transformations of Inconel 718 Alloy Fabricated by Selective Laser Melting

The Precipitation Behavior Effect of Δ and Γ" Phases on Mechanical Properties of Laser Powder Bed Fusion Inconel 718 Alloy

Simulation of δ-phase Precipitation Behavior in Hot Compression Deformation of Inconel 718 Superalloy

Effect of Hot Deformation on Γ″ and Δ Phase Precipitation of Inconel 718 Alloy During Deformation&isothermal Treatment

Evolution of strain-induced precipitates in Inconel 617B alloy and their effect on flow behavior

Revealing the γ′ and γ′′ Phase Fractions of Additively Manufactured and Differently Heat‐Treated Nickel‐Base Superalloy IN718 by Atom Probe Tomography and Their Impact on Mechanical Properties

Effects of the γ″-Ni 3 Nb Phase on Mechanical Properties of Inconel 718 Superalloys with Different Heat Treatments.

Composition and Element Distribution Mapping of γ′ and γ′′ Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

Effects of the γ″-Ni3Nb Phase on Mechanical Properties of Inconel 718 Superalloys with Different Heat Treatments

Effects of the "-Ni<sub>3</sub>Nb Phase on Mechanical Properties of Inconel 718 Superalloys with Different Heat Treatments

Evaluation on Elevated-Temperature Stability of Modified 718-Type Alloys with Varied Phase Configurations

Stability of Nanoscale Co-Precipitates in A Superalloy: A Combined First-Principles and Atom Probe Tomography Study