Abstract:Despite boasting giant leaps in performance improvement over the years, the current commercial standard, Li-ion batteries, are fast approaching their theoretical limits. Meanwhile, Lithium-Sulfur (Li-S) batteries offering ultra-high theoretical energy density (~2600 Whkg -1 ), cost-effectiveness, and nontoxicity are being seen as promising alternatives. Despite their plentiful advantages, the practicality of Li-S batteries has been largely stymied by several challenges: a) deleterious polysulfide dissolution and ‘shuttle effect’, b) significant volume change of S cathodes during cycling, c) safety concerns with flammable traditional glyme-based electrolyte, and d) the instability of Li anode. To mitigate these challenges, researchers have explored all-solid-state electrolytes, but their poor Li-ion conductivity, high interfacial impedance, and need for expensive, exotic materials and complex fabrication procedures severely limit their practical application. To overcome these challenges, we propose an in-situ gelled polymer-ceramic hybrid silsesquioxane-based electrolyte system. The gelled matrix, thermally crosslinked post cell fabrication, immobilizes the glyme-based liquid electrolyte and exhibits high liquid-like ionic conductivities (1.03 mS.cm -1 ), low interfacial impedance, and high oxidative potential (>4.5V vs. Li/Li + ) . In this study, in addition to vastly decreased flammability, we report superior Li-ion conductivity compared to state-of-art solid-state Li-S electrolytes. This high ionic conductivity translated to a significantly improved specific capacity of 1050 mAh.gS -1 at 0.2 C, elevated Coulombic efficiencies (>98.5%), and elevated rate kinetics. The gelled electrolytes exhibited stable cycling in a large temperature range (-10 o C - 60 o C). Moreover, polysulfide permeation studies and subsequent DFT calculations revealed that the gelled electrolyte exhibited strong chemical absorptivity to lithium polysulfides due to the polar silsesquioxane core, which translated to superior capacity retention (>80% over 200 cycles). Further, post- mortem XPS characterization studies revealed the formation of stable SEI at the anode and cathode, and SEM of cycled anodes showed reduced dendritic formations. Finally, the electrolyte was tested in practical pouch cell architecture, and the cells demonstrated excellent reliability even under mechanical stress. This work successfully reports a robust, rationally designed gelled electrolyte system for developing safe and high-performance quasi-solid state Li-S batteries.

A Quasi-Solid-state Rechargeable Cell with High Energy and Superior Safety Enabled by Stable Redox Chemistry of Li2S in Gel Electrolyte

A quasi-solid-state rechargeable cell with high energy and superior safety enabled by stable redox chemistry of Li 2 S in gel electrolyte

A Li 2 S-based all-solid-state battery with high energy and superior safety

High‐Energy and Safe Lithium Battery Enabled by Solid‐state Redox Chemistry in Fireproof Gel Electrolyte

Development of quasi-solid-state anode-free high-energy lithium sulfide-based batteries

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries

Li Metal-Free Rechargeable All-Solid-state Li2S/Si Battery Based on Li7P3S11 Electrolyte

A quasi-solid-state Li–S battery with high energy density, superior stability and safety

A Novel Lithiated Silicon-Sulfur Battery Exploiting an Optimized Solid-Like Electrolyte to Enhance Safety and Cycle Life.

In Situ Integration of a Flame Retardant Quasisolid Gel Polymer Electrolyte with a Si-Based Anode for High-Energy Li-Ion Batteries

High-Performance Quasi-Solid-State Lithium-Sulfur Battery with a Controllably Solidified Cathode-Electrolyte Interface

A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety

Electrolyte for Solid Lithium-Sulfur Batteries with High Safety and High Specific Energy

A Stable Quasi‐Solid‐State Sodium–Sulfur Battery

Quasi-solid-state Sulfur Cathode with Ultralean Electrolyte via In Situ Polymerization

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries

In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries

Quasi-solid-state electrolyte for ultra-high safety and cycle stability battery

Solid-State Li-Ion Batteries Using Fast, Stable, Glassy Nanocomposite Electrolytes for Good Safety and Long Cycle-Life

Unique Aqueous Li-ion/sulfur Chemistry with High Energy Density and Reversibility.

Preparation and performances of the modified gel composite electrolyte for application of quasi-solid-state lithium sulfur battery