Abstract:This paper proposes an all−digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time−Interleaved Analog−to−Digital Converter (TIADC). The output of the reference channel is aligned with each sub−channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub−channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high−speed data acquisition systems. The proposed architecture is applied to a 12−bit 2.4 GS/s four−channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off−chip calibration of a commercial 12−bit four−channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.

Adaptive Nonlinear Mismatch Calibration Technique for TIADC Based on Memory Polynomial Model

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

An Adaptive Blind Calibration Technique for Frequency Response Mismatches in M-Channel Time-Interleaved ADCs

Novel Adaptive Blind Calibration Technique of Time-Skew Mismatches for Any Channel Time-Interleaved Analogue-to-digital Converters

Machine-Learning Based Mismatch Calibration for Time-Interleaved ADCs

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

An improved wide-range, low-complexity, fully-parallel digital background timing mismatch calibration method for dual-channel TIADC based on perfect reconstruction filter bank

Adaptive Blind Correction Of Tiadc Mismatch Based On Cyclic Autocorrelation

Blind adaptive calibration of timing error for two- channel time-interleaved ADCs

Lms-Fir Based Digital Background Calibration For The Four-Channel Time-Interleaved Adc

Spectrum distribution‐based blind calibration method of mismatches for time‐interleaved ADCs

Calibration of Frequency Response Mismatches in Time‐interleaved Analog‐to‐digital Converter Based on Adaptive Method

A Digital Calibration Technique for N-channel Time-Interleaved ADC Based on Simulated Annealing Algorithm

An Improved All-Digital Background Calibration Technique for Channel Mismatches in High Speed Time-Interleaved Analog-to-Digital Converters

Adaptive calibration of gain and offset errors for time-interleaved ADCs

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

Calibration of Channel Mismatches in Time-interleaved ADCs Based on Multi-Frequency Reference Error Method

All-Digital Calibration of Timing Mismatch Error in Time-Interleaved Analog-to-Digital Converters.