Abstract:Recent investigations of Field Programmable Gate Array (FPGA)-based time-to-digital converters (TDCs) have predominantly focused on improving the time resolution of the device. However, the monolithic integration of multi-channel TDCs and the achievement of high measurement throughput remain challenging issues for certain applications. In this paper, the potential of the resources provided by the Kintex-7 Xilinx FPGA is fully explored, and a new design is proposed for the implementation of a high performance multi-channel TDC system on this FPGA. Using the tapped-delay-line wave union TDC architecture, in which a negative pulse is triggered by the hit signal propagating along the carry chain, two time measurements are performed in a single carry chain within one clock cycle. The differential non-linearity and time resolution can be significantly improved by realigning the bins. The on-line calibration and on-line updating of the calibration table reduce the influence of variations of environmental conditions. The logic resources of the 6-input look-up tables in the FPGA are employed for hit signal edge detection and bubble-proof encoding, thereby allowing the TDC system to operate at the maximum allowable clock rate of the FPGA and to achieve the maximum possible measurement throughput. This resource-efficient design, in combination with a modular implementation, makes the integration of multiple channels in one FPGA practicable. Using our design, a 128-channel TDC with a dead time of 1.47 ns, a dynamic range of 360 ns, and a root-mean-square resolution of less than 10 ps was implemented in a single Kintex-7 device.

A Vernier Caliper Time-to-Digital Converters with Ultralow Nonlinearity in FPGAs

A High-Linearity Vernier Time-to-Digital Converter on FPGAs With Improved Resolution Using Bidirectional-Operating Vernier Delay Lines

A High Resolution Vernier Digital-to-Time Converter Implemented with 65 Nm FPGA

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

A New Method of Implementing Vernier TDC in a Xilinx Kintex-7 FPGA

A Nonlinearity Minimization-Oriented Resource-Saving Time-to-Digital Converter Implemented in a 28 Nm Xilinx FPGA

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

A High Precision Time-to-Digital Converter based on Multi-chain Interpolation with a Low Cost Artix-7 FPGA

A Two-Stage Interpolation Time-to-Digital Converter Implemented in 20 and 28 N·m FGPAs

A 128-Channel, 710 M Samples/Second, and Less Than 10 Ps RMS Resolution Time-to-Digital Converter Implemented in a Kintex-7 FPGA

A 1.7 Ps Equivalent Bin Size and 4.2 Ps RMS FPGA TDC Based on Multichain Measurements Averaging Method

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

High-Resolution Time-to-Digital Converters Implemented on 40-, 28-, and 20-Nm FPGAs

A Tunable Parameter, High Linearity Time-to-Digital Converter Implemented in 28-Nm FPGA

A 16-Channel 15 Ps TDC Implemented in a 65 Nm FPGA

A 10ps 500MS/s two-channel Vernier TDC in 0.18um CMOS technology

An Adaptive Downsampling FPGA-Based TDC Implementation for Time Measurement Improvement

FPGA Vernier Digital-to-Time Converter With 1.58 ps Resolution and 59.3 Minutes Operation Range

A 128-Channel High Performance Time-to-Digital Converter Implemented in an UltraScale FPGA

ParCha: A New Resource-Efficient TDC With Salient Linearity Performance Using Parallel Short Chains

A Multi-chain Measurements Averaging TDC Implemented in a 40 nm FPGA