Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

Analysis and Design of Broadband, Transformer Based Matching Network

Transformer Based Broadband Matching

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

Design and Testing of a Medium Frequency Transformer

Comparative investigation on various on-chip center-tapped interleaved transformers: Research Articles

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Broadband Equivalent Circuit Modeling for Medium Voltage High-Frequency Transformers with Multi-Shielding Structure

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits

An analytical approach to designing millimeter‐wave LNAs with transformer‐based matching networks

A Broadband Monolithic Balun Based on 0.13μ CMOS m Process Using Planar-Spiral Transformers

A Broadband Monolithic Balun Based on 0.13/spl mu/m CMOS Process Using Planar-Spiral Transformers

A $Ka$-Band Broadband Power Amplifier with Transformer-Based Lossy Magnetically Coupled Resonator Network: Analysis and Design

Analysis and Design of High-Frequency Converter With Resistive Matching Network and Spiral Inductor

Design of Monolithic Broadband Balun Based on Planar-Spiral Inductors

Line segment technique applied to the double broadband matching

Improved Design Optimization for High-Efficiency Matching Networks