Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Effect of Multiscale Reinforcement by Fiber Surface Treatment with Polyvinyl Alcohol/graphene Oxide/oxidized Carbon Nanotubes on the Mechanical Properties of Reinforced Hybrid Fiber Composites

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod

Reinforcing Effect of Hybrid Nano-Coating on Mechanical Properties of Basalt Fiber/poly(lactic Acid) Environmental Composites

Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites

Effect of graphene oxide on tensile and flexural properties of carbon/glass hybrid fiber‐reinforced polymer composite

Simultaneously strengthening, toughening, and damage monitoring of fiber reinforced composite by using a rigid/flexible hybrid modifier

Hybridization of cellulose nanocrystals modified ZnO nanoparticles with bio-based hyperbranched waterborne polyurethane sizing agent for superior UV resistance and interfacial properties of CF/PA6 composites

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol

Construction of an Orderly Carbon Fiber/Carbon Nanotubes Hybrid Composites by a Mild, Effective, and Green Method for Highly Interface Reinforcement

Tensile behavior of ultra‐high performance concrete reinforced with different hybrid fibers

Establishment of Silane/GO Multistage Hybrid Interface Layer to Improve Interfacial and Mechanical Properties of Carbon Fiber Reinforced Poly (phthalazinone ether ketone) Thermoplastic Composites

Effects of fibers on the mechanical properties of UHPC: A review

Enhancing interlaminar fracture toughness of CFRP laminates with hybrid carbon nanotube/graphene oxide fillers

Effects of hybrid fibers on properties of desulfurized gypsum-based composite cementitious materials

Fiber Synergy of Polyvinyl Alcohol and Steel Fibers on the Bond Behavior of a Hybrid Fiber-Reinforced Cementitious Composite

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Establishing interphase with "rigid-flexible coupling" crosslinking network by supramolecular structure to improve interfacial properties of high modulus carbon fiber reinforced polymer composites