Abstract:Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a significant duration of system runtime. Projected future linear accelerators require structures with accelerating gradients of up to 100 MV/m. Currently, this performance level is only achievable after a multi-month conditioning period. In this work, a pulsed DC system applying voltage pulses over parallel disk electrodes was used to study the conditioning process, with the objective of obtaining insight into its underlying mechanics, and ultimately, to find ways to shorten the conditioning process. Two kinds of copper electrodes were tested: As-prepared machine-turned electrodes ("hard" copper), and electrodes that additionally had been subjected to high temperature treatments ("soft" copper). The conditioning behaviour of the soft electrodes was found to be similar to that of comparably treated accelerating structures, indicating a similar conditioning process. The hard electrodes reached the same ultimate performance as the soft electrodes much faster, with a difference of more than an order of magnitude in the number of applied voltage pulses. Two distinctly different distributions of breakdown locations were observed on the two types of electrodes. Considered together, our results support the crystal structure dislocation theory of breakdown, and suggest that the conditioning of copper in high field systems such as rf accelerating structures is dominated by material hardening.

Reshaping of Micro-morphology Feature in Electrode Surface under Conditioning by Lightning Impulse Voltage in Vacuum Gaps

Surface and sub-surface modifications of copper electrodes exposed to high-field conditioning at cryogenic temperatures

Discharge and breakdown mechanism transition in the conditioning process between plane-plane copper electrodes in vacuum

Conditioning a Copper Cathode Surface by High-Voltage Subnanosecond Pulses

Anode Erosion Pattern Caused by Blowing Effect in Constricted Vacuum Arcs Subjected to Axial Magnetic Field

Vacuum electrical breakdown conditioning study in a parallel plate electrode pulsed DC system

Effect of Micro-particles Impact Phenomena on Contact Surface in High Voltage Vacuum Interrupter after Conditioning

Surface Changes in Fe–Cr–Ni Alloy Bombarded by Relativistic Pulsed Electron Beam and Associated Mechanism

Experimental Study of Cathode Spots and Plasma Dynamic Characteristics Based on Electrode Grain Structure

Distribution of Molten Layer and Anode Erosion Pattern Caused by Constricted Vacuum Arcs

The Study of Thin Film High–voltage Li-Ion Cathodes to Reveal Surface Reactions and Coating Performance

Metal Ablation Affected by Electrode Shapes under Long Continuing Lightning Current

Simulation of Cathode Spots Crater Formation on Electrodes with Micro-Scale and Nano-Scale Alloy Materials in a Vacuum Arc

INFLUENCE OF THE MICROSTRUCTURE OF ELECTRODE MATERIALS ON THE MOTION BEHAVIORS OF VACUUM ARC CATHODE SPOT

Effect of the Microstructure of Electrode Materials on Arc Cathode Spot Dynamics

Cathode: the Key Factor in Vacuum Breakdown

Investigation on Crater Morphology by High Repetitive Rate YAG Laser-Induced Discharge Texturing

Effect of Burning Conditions on Erosion Shape of Cathode in Pulsed Cathodic Arcs

Influence of Crystal Morphology on Breakdown Characteristics in Vacuum Between Nano Scale Gaps

Relationship Between Morphology Feature of Contact Surfaces and Impulse Breakdown Voltage in Vacuum Gap under a Non-uniform Electric Field

Analysis on the Choosing of Test Electrode for Lightning Current Metal Ablation Experiments