Abstract:Micro-cathode arc thruster offers promising applications in micro–nanosatellite space missions owing to its simple structure, high specific impulse, and low power consumption. However, the non-uniform ablation of the cathode poses a significant limitation on the total impulse of micro-cathode arc thruster. This non-uniformity can be categorized into circumferential and radial types, with previous research primarily focusing on the influence of circumferential ablation non-uniformity. Nevertheless, it has been observed that radial ablation non-uniformity also affects the stability of the thruster, despite the lack of studies in this area. To investigate the mechanism behind the cathode radial ablation, a slice model has been designed to study the motion process of the cathode spots during a single discharge using a high-speed camera. From this analysis aims to identify the root cause of uneven cathode radial ablation. Building upon these findings, a double anode micro-cathode arc thruster has been devised to enhance the uniformity of cathode ablation. Experimental verification has been conducted to assess the performance of the double anode micro-cathode arc thruster. The results indicate that in the traditional micro-cathode arc thruster discharge process, the cathode spots do not migrate towards the outer layer covered by the shell. Instead, they extend to the surface of the shell along the contact area between the shell and cathode. This leads to unequal ablation between the inner and outer layers of the cathode. The double anode micro-cathode arc thruster effectively addresses these issues by providing two discharge channels that maintain the dynamic balance of electrode resistance and increase the ablation amount on the outer layer of the cathode. Consequently, the total impulse of the thruster improved significantly while ensuring the desired performance index.

Analysis of internal material characteristics of cathode crater of micro-cathodic arc thruster

Radial ablation uniformity of cathode and design of double anode micro-cathode arc thruster

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Design of 1.5 kW-Level Anode Power Supply for Magnetic Focusing Hall Thruster

Discharge Characteristics and System Performance of the Ablative Pulsed Plasma Thruster with Different Structural Parameters

Numerical study on the effects of discharge parameters on vacuum arc plasma

Full lifetime demonstration of a Micro-Cathode-Arc thruster evolution characteristics

The mechanism of multi-anode electrode geometry applied to vacuum arc thruster

Inhomogeneous Ablation Behaviors and Failure Mechanism of Copper Cathode in Air

Effects of selected cathode materials on a magnetically enhanced vacuum arc thruster

Investigation of vacuum arc ignition characteristics and erosion morphology microstructure characteristics of CuCr55 electrode contact materials

Effect of the Microstructure of Electrode Materials on Arc Cathode Spot Dynamics

Research on the life-limiting sputtering mechanism of 30 cm ion thruster

Kinetic investigation of discharge performance for Xe, Kr, and Ar in a miniature ion thruster using a fast converging PIC-MCC-DSMC model

Insights into surface modification and erosion of multi-element arc cathodes using a novel multilayer cathode design

Optimization of Plasma Plume Characteristics Based on Multi-anode Coaxial Ablative Pulsed Plasma Thruster

Research on the influence of grain size of CuCr contact on the characteristics of cathode spot and cathode surface erosion in vacuum arc

Kinetic analysis of direct-current driven microdischarges with thermo-field electron emission at atmospheric pressure

Endurance-test and theoretical prediction of a rare earth nanocathode for the applied field magnetoplasmadynamic thruster

Effect of Anode Configuration on Ionization Characteristic in Miniature Ion Thrusters

Study on microspot splitting characteristics in cathode spot motion of vacuum arc