Abstract:Epoxy resin has been widely used in electronic and electrical equipment due to its excellent electrical and mechanical properties. However, prolonged corona discharge may cause deterioration of the surface, and finally lead to failure of insulation structure. Extensive researches have indicated that addition of nano fillers can improve corona resistance of polymers. In this paper, epoxy/SiO2 nanocomposites are prepared to study the micro development of corona erosion and surface trapping performance during corona aging. AC breakdown strength of epoxy/SiO2 nanocomposites is measured firstly and 2 wt% epoxy/SiO2 nanocomposite with highest AC breakdown strength of 64.11 kV/mm is selected to conduct corona resistance test with pure epoxy. It was observed by polarizing microscope that the degradation was severer for pure epoxy resin with corrosion area from about 0.27 mm2 at 10 min to 0.57 mm2 at 30 min, while the area of 2 wt% nano-SiO2 nanocomposite is nearly invariable about 0.21 mm2. With the increase of corona duration, the corrosion regions become darker which indicates thicker channel and more intensive corrosion density. Additionally, the corona damage extends from the center to edge of samples in shape of “branch”, and “branch” channels of degradation develop denser in the center. The isothermal surface potential decay (ISPD) results show that shallow trap ranges from 0.90 to 1.00 eV, whereas the deep trap locates at 1.05∼1.15 eV. The deep energy density of pure epoxy decreases dramatically from 7.2x1014 m−3 to 4.9x1014 m−3 with corona aging time, while that of 2 wt% epoxy/SiO2 nanocomposite maintains constant about 6.9x1014 m−3. Both of the shallow trap density of epoxy and nanocomposite increases after corona aging, while pure epoxy increases more obvious from 1.6x1013 m−3 to 3.8x1013 m−3. Therefore, charges are more difficult to inject and move in epoxy nanocomposites because of more deep traps even after corona exposure, which illustrates why nanocomposites have higher corona resistance.

Surface Corona Aging of Epoxy Resin under Bipolar Square Wave Field with Varied Frequencies

Surface Degradation of Epoxy Resin Exposed to Corona Discharge under Bipolar Square Wave Field: from Phenomenon to the Insights

Surface Corona Aging of Epoxy/SiO2 Nanocomposites

Space-Charge Characteristics in Epoxy Composites Under Square Pulse Wave of Different Polarities With Various Frequencies at Various Temperatures

Investigation of Electrical and Thermal Behavior of Modified Epoxy Structures for DC and High Frequency Applications

Space Charge Dynamics in Epoxy Based Composites under DC and Square Pulse Wave of Different Polarities and Frequencies

Research on Surface Charge Characteristics of Epoxy Insulating Material by DC Corona

Surface Damage of Polymer Dielectric under Repetitive Frequency Bipolar Square-Wave Voltage

Improved Resistance of Epoxy Resin to Corona Discharge by Direct Fluorination

Effect of Epoxy Resin Spacers on Corona Characteristics in SF6/N2 Mixtures under Positive DC Voltages

Research on Surface Potential Decay Characteristics of Epoxy Resin Charged by Direct Current Corona

Effect of Mechanical Vibration on Surface Discharge along Epoxy Resin under AC Electric Field

Aging Effects of Conductor Surface Conditions on AC Corona Discharge

Surface Charge Properties of Epoxy Composites under DC Voltage Affected by Surface and Bulk Conductivity

Research on Numerical Simulation for Partial Discharge of Epoxy Interface Excited by High‐frequency Sinusoidal Voltage

Effect of Vibration on Surface Discharge of Epoxy Resin

Electrical Tree Propagation in Epoxy Resin under Bipolar Square Wave Field with Varied Frequencies

Experimental Study on the Decay Process of Surface Charges on Epoxy Insulators Under Different Temperature in Air

Influence of Aged Conductor Surface Conditions on AC Corona Discharge with a Corona Cage

Analysis on Surface Characteristics of Composite Insulator Materials after Corona Discharge

Effect Of Dc Voltage With Multiple Harmonics On Space Charge Behavior In Epoxy Resin