Abstract:The breaking capacity of rated current is one of the important indexes to evaluate the performance of circuit breakers, which is usually measured experimentally and cannot be analyzed in terms of the arcing characteristics of the opening process. Simulation methods based on the magnetohydrodynamic (MHD) model of the arc can be used to obtain the macroscopic motion of the arc within the interrupter and the interaction of the arc with the contacts, walls, and splitter plates. Therefore, this paper focuses on the arc interruption characteristics' underrated current in low voltage circuit breakers by MHD simulation. A more accurate and effective field-circuit coupling MHD simulation model of low voltage circuit breaker products is developed in this paper. A nonlinear conductivity model of the sheath layer is considered to better simulate the near-pole voltage drop and bending processes after the arc has been cut by the splitter. The time-dependent magnetic field generated by the arc is considered in the calculation. Additionally, the real-time parameters of the external circuit are coupled to reflect the evolution of the arc characteristics under the action of the external circuit. The simulation results intuitively and clearly show the evolution of the arc during the breaking process. Through this, an arc extinguishing chamber can be designed to effectively regulate the arc interruption characteristics, thereby improving the breaking capacity of the circuit breaker. The accuracy and efficiency of the proposed simulation method is verified by experiments. This method can be extended to the performance analysis of AC/DC low voltage circuit breakers.

Experimental Investigation of the Breaking Arc Behavior and Interruption Mechanisms for AC Contactors

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Experimental investigation on magnetically controlled air arc oscillation characteristics for DC interruption

Research on DC Breakdown Characteristics for the Insulation of 10 Kv AC XLPE Cables

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

The Influence of Contact Space on Arc Commutation Process in Air Circuit Breaker

Research of simulation and experiment on arc characteristics of gas mechanical switch

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Influence of external AC transverse magnetic field on air arc oscillation patterns and its application in DC forced current zero techniques

An Experimental Study of AC Arc Propagation over a Contaminated Surface

Contact Parameter Computation and Analysis of Air Circuit Breaker with Permanent Magnet Actuator

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

Current Status of Testing and Research on Circuit Breaker Mechanical Performance and Arc Extinction

Numerical Simulation and Experimental Investigation of the Influence of Gap Distance on Vacuum Arc Characteristics Between TMF Contacts

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Arc Movement Inside an AC/DC Circuit Breaker Working With a Novel Method of Arc Guiding: Part I—Experiments, Examination, and Analysis

Research on AC Arc Fault Characteristics Based on the Difference Between Adjacent Current Cycle

Thermal Simulation of AC Contactor

A Novel AC Contactor to Achieve Energy-Saving Noiseless Operating and Arcless Interruption

Switching Arc Energy Limitation Approach for LV Circuit Breakers