Abstract:Since the dead-zone fault in substations often has a relatively long removal time, it may damage the insulation of power equipment and even threaten the stability of the power system. In this paper, the movement of the dead-zone fault electric arc in a 220-kV substation is investigated. The arc chain model for the dead-zone fault electric arc is developed; the influences of electromagnetic force, thermal buoyancy, and the air resistance stressed on the electric arc are comprehensively considered. The electric arc velocity and displacement are computed. Then, the spreading characteristics of the dead-zone electric arc under various conditions are studied. The spreading trend of the dead-zone fault electric arc is summarized. Finally, measures to inhibit the spreading of the electric arc are suggested. The study indicates that the movement of the electric arc in the dead zone during the early stage is primarily influenced by the electromagnetic force resulting from the overpass and conductor, and the arc is concave and has an irregular trajectory. The inclination angle of the conductor significantly affects the direction of the electromagnetic force. If the conductor is laid horizontally, the electric arc is subjected to a smaller force. The electromagnetic force stressed on the electric arc is mainly attributed to the fault phase conductor and the electric arc body itself, whereas those from the other phase conductors are minor. The initial position of the arc root has a certain impact on the movement of the electric arc. The use of the insulating materials restricts the arc root movement.

An Experimental Study of AC Arc Propagation over a Contaminated Surface

Study on the Extension Process of AC Local Arc on Wet Contaminated Insulating Surface

Researches on Spectrums and Macroscopic Forms of DC Arc in a Short Air Gap

Propagation Models for Motion Processes of Long Ac Arcs on Overhead Lines

Dynamic Characters Exploring of Flashover Arc for AC Contaminated Insulators

Study on the Typical Optical Emission Spectrograms of AC Arc Discharge over the Polluted Insulation Surface

Study of the Ac Arc Discharge Characteristics over Polluted Insulation Surface Using Optical Emission Spectroscopy

Experimental Study on Arcing Process of Vacuum Arc under Wan-Type Contacts

Experimental Investigation of the Breaking Arc Behavior and Interruption Mechanisms for AC Contactors

Effect of Vertical Electric Field Components on the Local Arc Development along Contaminated Surfaces

Motion behavior of a high-current fault electric arc occurred in the dead zone of protection in a substation

Research on Restriking Phenomena and Mechanism During DC Arc Motion Process

Influence of Contaminated Location on Streamer Discharge

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

Simulation of Low-Voltage Arc Plasma During Contact Opening Progress

Study on the Dynamic Characteristics of Plasma in the Post-arc Process of Vacuum Arc Interrupting

Experimental Research on Voltage-Current Characteristics of Carbon AC Arc

Modeling of AC Arc Discharge on Insulators in Consideration of Arc Characteristic Differences Between Partial Arcs on Top and Bottom Wet-polluted Dielectric Surfaces

Experimental Study on the DC Arc Characteristics Surrounded by Underwater and Air

A Study on Streamer Discharge Characteristics along Contamination Insulator Surface

Arc root dynamics in the context of lightning strikes to aircraft