Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

Prediction model for the thermal conductivity of concrete based on its composite structure

A Simulation Analysis Research on the Material Performance of Resin Concrete

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Model for Hydration Heat of Cement in Concrete and Its Application

Two-Dimensional Microstructure-Based Model for Evaluating the Permeability Coefficient of Heterogeneous Construction Materials

Diffusion model of multi ions in concrete based on composite theory

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

A Multi-Phase Model for Predicting the Effective Diffusion Coefficient of Chlorides in Concrete

Effect of Pore Shape on the Thermal Conductivity of Partially Saturated Cement-Based Porous Composites

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

A new method for predicting compressive strength of cement-based materials

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Numerical simulation of the freezing process of concrete

Theoretical Model for Estimation of Ice Content of Concrete by Using Electrical Measurements

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect