Abstract:Controlling blast load damage and destruction of the remaining rock mass in rock blasting has been the focus of scientific research. By studying various decoupling ratios of the slit charges, blasting experiments and numerical calculations of the small charge were carried out on the glauconite specimen. The internal fracture and damage characteristics of the damaged specimens (post blast) were quantified by computed tomography (CT) scanning and three-dimensional (3D) model reconstruction. The results showed that the damage to the glauconite specimens was mainly radial, with the main crack surface in the slit direction and the "X-type" and "Y-type" non-slit directions. With the increase in the decoupling ratio of the slit charge, the fractal dimension of the explosion crack face tends to increase, and the degree of damage gradually increased; When the decoupling ratio was 1.67, the fractal dimension of the explosive crack surface decreased, the smallest degree of damage. LS-DYNA simulation software was used to study the dynamic fracture process and the effective stress peak of the blasthole wall in the slit and non-slit directions for different decoupling ratios of the slit charge. The numerical calculation results showed that with the increase in the decoupling ratio, the peak effective stress of the blasthole wall characteristic unit in the slit direction was larger than that in the non-slit direction; The effective stress peak showed an increasing trend, and the maximum peak effective stress was 567.7 MPa when the decoupling ratio was 1.67. Therefore, this method can be a suitable means to reconstructing the spatial distribution of internal cracks and numerical calculation to evaluate the damage mechanism of slit charge blasting; Furthermore, within the range of the optimal slit charge decoupling ratio, this method can guide the site to prevent the damage and destruction of the remaining rock mass, allowing for more, allocation and utilization of the explosion energy.

Study of Presplitting Blasting Parameters and Its Application Based on Rock Blasting-Induced Damage Theory

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Investigation on Rock Fracturing in Presplit Blasting Under Various Initial Stresses

Study of rock damage characteristics in decoupled slit charge blasting based on computer tomography scanning

Damage and Fragmentation of Rock Under Multi-Long-Hole Blasting with Large Empty Holes

Effect of confining pressure on damage accumulation of rock under repeated blast loading

Study on crack propagation mechanism and charge structure optimization of tunnel shaped charge hydraulic blasting

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

Study on Distribution Characteristics of Damage Range along Smooth Blasting Hole Based on PPV

Study on Blasting Characteristics of Soft-Hard Rock Strata Based on Energy Fields and Particle Expansion Loading Algorithm

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

Experimental Investigation of the Propagation and Attenuation Rule of Blasting Vibration Wave Parameters Based on the Damage Accumulation Effect

Influence of Joint Conditions and Blast Design on Pre-split Blasting Using Response Surface Analysis

Study on blast‐induced cracks penetration characteristics of double water jet slotted boreholes

Numerical study on the dynamic fragmentation of rock under cyclic blasting and different in-situ stresses

Study on the influence of slit pipe wall thickness on the rock breaking effect of slit charge explosion

Research on the crack formation mechanism of shaped charge blasting and the new dual-shaped charge blasting technology

Numerical study on the behavior of blasting in deep rock masses

The Effect of Stress Wave Interaction and Delay Timing on Blast-Induced Rock Damage and Fragmentation

Experimental research and application of drilling and blasting with directional damage-reduction shaped charge

Calculation of hole spacing and surrounding rock damage analysis under the action of in situ stress and joints