Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

Investigation of bending deformation of underground pipelines induced by differential ground movements

Tunnelling-induced Nonlinear Responses of Continuous Pipelines Resting on Tensionless Winkler Foundation

Tunnelling-induced response of buried pipelines and their effects on ground settlements

Elasto-plastic Solution for Tunnelling-Induced Nonlinear Responses of Overlying Jointed Pipelines in Sand

Calculation on Mechanical Behaviors of Buried Pipelines Adjacent to Deep Excavation

Tunnelling-induced Response of a Jointed Pipeline and Its Equivalence to a Continuous Structure

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Numerical Investigation of Pipeline Responses to Tunneling-Induced Ground Settlements in Clay

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Analytical Solution for Upheaval Buckling of Shallow Buried Pipelines in Inclined Cohesionless Soil

Analysis of influence of ground penetrating shield tunnel excavation on adjacent underground pipeline

Prediction for influence of tunneling on adjacent pipelines

Prediction for Response of Adjacent Pipelines Induced by Pipe Jacking Construction

Investigation of Three-Dimensional Deformation Behavior Due to Long and Large Excavation in Soft Clays

Analysis of Effect of Ground Deformation on Buried Pipe

Using Finite Element Method for Stress-Strain Evaluation of Commonly Used Buried Pipelines in Fault

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation