Abstract:Silicon photonics devices benefit greatly from a partially etched platform and inverse design. Herein, we propose a bi-layer polarization splitter and rotator with a topology pattern and demonstrate it on a silicon-on-insulator platform. Our device exhibits a significantly reduced physical footprint of only 2µm×6µm, compared to traditional directional couplers and tapered waveguides. The device accomplishes the functions of polarization conversion and separation in such a compact design without redundant tapered or bending waveguides. The tested minimum insertion loss with the fabrication batch reaches 0.57 and 0.67 dB for TE and TM modes, respectively. The TE mode demonstrates a wider bandwidth and lower ILs than the TM modes, averaging around 1 dB from 1530 to 1565 nm. The M modes exhibit approximately 2 dB ILs at the same wavelength range, decreasing to about 1 dB between 1565 and 1580 nm. Improved designs and fabrication conditions strongly suggest the potential for further performance enhancement in the device. This successful initiative validates the exceptional performance resulting from the integration of the partially etched platform and inverse design, providing valuable insights for future photonic integrated device designs.

Inverse Design of a SOI T-junction Polarization Beamsplitter

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Improved Inverse Design of Polarization Splitter with Advanced Bayesian Optimization

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Intersected Slot Waveguide for Dual Polarized Mode Low-Index Confinement and Its Polarization Conversion

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Inverse Design of Highly-Efficient and Broadband Polarization Beam Splitter on SOI Platform

A Compact SOI Polarization Beam Splitter Based on Multimode Interference Coupler

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Compact and Low Loss Silicon-Integrated Polarization Beam Splitter Developed by Efficient Semi-Inverse Design Approach

Highly-efficient broadband TE/TM polarization beam splitter

Integrating Inverse Design and Partially-etched Platform: An Ultra-compact Polarization Splitter and Rotator as An Example

Inverse design of a silicon-based ultra-compact four-channel mode splitter with dual polarizations

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Ultra-compact broadband polarization beam splitter with strong expansibility

Broad Bandwidth and Large Fabrication Tolerance Polarization Beam Splitter Based on Multimode Anti-Symmetric Bragg Sidewall Gratings

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Inverse Design of Ultra-broadband and Ultra-compact Polarization Beam Splitter via B-spline Surface

Tilted Nano-Grating Based Ultra-Compact Broadband Polarizing Beam Splitter for Silicon Photonics