Abstract:In recent years, a new generation of storage ring based light sources, known as diffraction limited storage rings (DLSRs), whose emittance approaches the diffraction limit for the range of X ray wavelengths of interest to the scientific community, has garnered significant attention worldwide. Researchers have begun to design and build DLSRs. Among various DLSR proposals, the hybrid multibend achromat (HMBA) lattice enables sextupole strengths to be maintained at a reasonable level when minimizing the emittance; hence, it has been adopted in many DLSR designs. Based on the H7BA lattice, the design of the Advanced Photon Source Upgrade Project (APSU) can effectively reduce emittance by replacing six quadrupoles with antibends. Herein, we discuss the feasibility of designing an APSU type HMBA lattice for the Southern Advanced Photon Source, a mid energy DLSR light source with ultralow emittance that has been proposed to be built adjacent to the China Spallation Neutron Source. Both linear and nonlinear dynamics are optimized to obtain a detailed design of this type of lattice. The emittance is minimized, while a sufficiently large dynamic aperture (DA) and momentum acceptance (MA) are maintained. A design comprising 36 APSU type H7BAs, with an energy of 3 GeV and a circumference of 972 m, is achieved. The horizontal natural emittance is 20 pm rad, with a horizontal DA of 5.8 mm, a vertical DA of 4.5 mm, and an MA of 4%, as well as a long longitudinal damping time of 120 ms. Subsequently, a few modifications are performed based on the APSU type lattice to reduce the longitudinal damping time from 120 to 44 ms while maintaining other performance parameters at the same level.

DA Optimization Experiences in the HEPS Lattice Design

Physics Issues in Diffraction Limited Storage Ring Design

Design Study of APSU Type Hybrid MBA Lattice for Mid Energy DLSR

A Low Emittance Lattice Design For Hls Storage Ring

Design of a Hybrid Ten-Bend-achromat Lattice for a Diffraction-Limited Storage Ring Light Source

Design of a Diffraction-Limited Storage Ring Lattice Using Longitudinal Gradient Bends and Reverse Bends

Advanced storage ring lattice options based on hybrid six-bend achromat for Stanford Synchrotron Radiation Lightsource upgrade

Simultaneous Optimization of Beam Emittance and Dynamic Aperture for Electron Storage Ring Using Genetic Algorithm

Lattice design for a low energy electron storage ring

Lattice optimization for the HLS-Ⅱ storage ring

Lattice design and beam lifetime study for HLS storage ring upgrade project

Nonlinearly Shaped Pulses in Photoinjectors and Free-Electron Lasers

Design study of a low emittance complex bend achromat lattice

Low emittance lattice optimization using multiobjective genetic algorithm

The upgrade project of Hefei Light Source (HLS)

Beam Dynamics Optimization of Very-High-frequency Gun Photoinjector

Minimizing the fluctuation of resonance driving terms in dynamic aperture optimization

Low emittance optics design for CEPC booster

Design of the Magnets of the HALS Project