Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Flow Characteristic Prediction for Liquid-Liquid System in a Stirred Tank Based on RNG K-Ε Model

MEASUREMENT AND NUMERICAL SIMULATION OF FLOW FIELD IN STIRRED TANK WITH MULTIPLE IMPELLERS

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

Multi-dimensional analysis of turbulence models for immiscible liquid-liquid mixing in stirred tank based on numerical simulation

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

A Dual-Scale Turbulence Model for Gas–liquid Bubbly Flows

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Flow pattern identification for three-phase distillation with a nonequilibrium modeling

SIMULATION OF TURBULENT FLOW IN PUMP BASED ON SLIDING MESH AND RNG κ- ε MODEL

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

Algebraic Stress Model with RNG Ε-Equation for Simulating Confined Strongly Swirling Turbulent Flows

Numerical simulation of macro-mixing in liquid-liquid stirred tanks

A k-ε turbulence model for bubbly two phase flow and prediction of liquid velocity and turbulent kinetic energy distribution

Unsteady Prediction of Cavitating Flow Around a Three Dimensional Hydrofoil by Using a Modified RNG K-Ε Model

Numerical Simulation of Turbulent Flow around Bluff Bodies Using the RNG k-ε Turbulent Model

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

NUMERICAL INVESTIGATION ON TURBULENCE MODELS IN BUBBLY FLOW USING EULER-LAGRANGE APPROACH

Numerical study on turbulence separated flow in fine coal ring-shaped pipe separator with RNG k-ε model and standard k-ε model

Application of different turbulence models in numerical simulation of mixed-flow pump and its evaluation

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks