Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Numerical Simulation of Turbulent Flow around Bluff Bodies Using the RNG k-ε Turbulent Model

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Application and comparison of different turbulence models in the simulation of numerical wave flume

The Unsteady Numerical Simulation of Flow around Building

Comparison of low Reynolds Number k-ε Models in Predicting Complicated Flow Field Around a Bluff Body

A Modified RNG k—ε Model of the Numerical Simulation on an Airfoil

Numerical Simulation of the 3D Turbulent Flow in Centrifugal Impeller

Numerical Analysis of High-lift System with Externally Blown Flap Using N-S Equations

Applying Robinson's New Two-Equation Turbulence k-(?) Model to Numerically Simulating Turbulent Flow

Numerical study on turbulence separated flow in fine coal ring-shaped pipe separator with RNG k-ε model and standard k-ε model

Numerical Simulation on Ship Bubbly Wake

Numerical Simulation for Cavitation Water Jet Flow Field Through Convergent-Divergent Nozzle

The Numerical Simulation of Interaction between Free-Surface Wake Generated by a Moving Submerged Body and Stochastic Ocean Waves

Comparisons of different turbulence models based on the flow around a bottom-mounted cylinder

Numerical Simulation of Cavitation Around a Hydrofoil and Evaluation of a RNG Κ-Ε Model

Evaluation of the RNG k-ε model on the numerical simulations of supercavitating flows around a hydrofoil

Numerical simulation of JBC flow based on GEKO model

Applicability of the turbulence model in numerical simulation of vacuum gas quenching process

Turbulence Modeling of Internal Combustion Engines Using RNG Κ-Ε Models