Abstract:Power density and efficiency are main specifications of on-board chargers (OBC) for electric vehicles (EV). Single-stage OBCs are advantageous in terms of efficiency and cost, while the double-line frequency variation on the DC side should be carefully considered in the design phase. The double-line frequency variation may cause large charging current ripples, and subsequently, affecting the battery lifetime. Large electrolytic capacitors can be used to reduce the ripples, which makes the overall system bulky. Hence, active power decoupling (APD) technologies are favorable in single-stage OBC applications. The paper studies a control of the bidirectional buck/boost type APD circuit for a single-stage LLC-OBC. There are three control loops in the control. As the inner control loop, APD inductor current is controlled to ensure the APD working in the stable region, the second control loop is battery charging current control which is applied to control the double-line frequency part of charging current equaling to zero. The outer loop is APD capacitor voltage control which fixes the DC part of APD capacitor voltage equaling to half of battery voltage. A proportional resonant controller is applied in second loop, proportional integral controllers are used in the inner loop and the outer loop. By combining the two kinds controller, the APD control strategy can achieve power decoupling effectively in OBC applications. the paper details the design of the APD control strategy. Finally, an LLC-OBC prototype with the APD is tested to verify the efficacy of the control design.

Design of Power Factor Correction System for On-board Charger *

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

An Integrated Design of Power Converters for Electric Vehicles.

Design of a 300 Kw Partial Power Processing Based DC-DC Converter for Electric Vehicles Extreme Fast Charging Stations

Design and Analysis of Single-Stage Power Factor Correction Converter with a Feedback Winding

Design of a Power Supply Module for Electric Vehicle Charging Station

Bi-directional On-Board Charger Architecture and Control for Achieving Ultra-High Efficiency with Wide Battery Voltage Range

High-Performance Control Simulation of PFC Converter for Electric Vehicle Charger

Design of Ac/dc Converter for Bidirectional On-Board Battery Charger with Minimizing the Amount of SiC MOSFET

Power Decoupling Control for Single-Stage On-Board Chargers

Design of Interleaved Boost PFC Converter with Peak Current Control

Control of Bi-directional DC/DC Converter for Auxiliary Power System Application of Electric Vehicle

An energy efficient unidirectional on-board battery charger for power factor correction in electric vehicles

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

High Power Integrated Charging System For Electrical Vehicles Based On Winding Multiplexing Of Pmsm

A Unified Criterion for Integral On-board Charger of Electric Vehicles Using Propulsion System

An improved control scheme for buck PFC converter for high efficiency adapter application

A Family of Single-Phase Hybrid Step-Down PFC Converters

Application of improved bridgeless power factor correction based on one-cycle control in electric vehicle charging system

Integrated High- and Low-Frequency Current Ripple Suppressions in a Single-Phase Onboard Charger for EVs

Single‐phase front‐end modified interleaved Luo power factor correction converter for on‐board electric vehicle charger