Abstract:Brillouin Optical Time Domain Reflectometer (BOTDR), as a distributed optical fiber sensing technique, has been widely used in health monitoring of large structures on the ground in recent years. Space engineers also have a strong interest in it. However, in space environment, the optical performance of sensing fibers in BOTDR will decrease due to space radiation. Usually, the ground simulation space radiation experiment only considers the influence of radiation damage on optical properties of optical fibers. However, the performance variation of optical fibers after radiation is a combined result of radiation damage and self-recovery. If the restoring characteristic is introduced into the radiation damage model, the accuracy of BOTDR radiation assessment will be greatly improved. To study the radiation recovery characteristics of BOTDR, a 1 km single-mode G.652.D YOFC fiber is used as the sensing optical fiber of BOTDR, and is placed in the radiation field of Co-60 to receive 200Gy gamma radiation with 1.42 Gy/min dose rate. After the radiation procedure, the radiation recovery characteristics of BOTDR were monitored for 1506 hours. The experimental results show that the radiation recovery effect has little effect on Brillouin frequency shift and stress coefficient, but the attenuation coefficient of optical fiber caused by radiation can be restored obviously in the first 100 hours. The attenuation coefficient of optical fiber recovers from 3.5 dB/km to 1.5 dB/km. The above results are of great significance to modify the radiation model of BOTDR in space radiation environment.

Investigation of the Radiation Effect on BOTDR under Low Space Radiation Doses

Investigation on the Radiation Recovery Effect on BOTDR System

Investigation of Radiation Recovery Effect on Sensing Fibre in BOTDR

Investigation on the Improvement of Brillouin Optical Time-Domain Reflectometer with Golay Pulse Codes in Radiation Environment

Space radiation effect on the characters of fiber amplifiers for space optical communication

The Use of BOTDR to Evaluate the Thermal Effects on Fiber Residual Strain of Optical Fiber Cables

Analysis of the space radiation effect on EDFA for inter-satellite optical communication

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Space Radiation Effect on Edfa for Inter-Satellite Optical Communication

A Wavelength-Scanning Brillouin Optical Time Domain Reflectometer

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Determination of thermal residual strain in cabled optical fiber with high spatial resolution by Brillouin optical time-domain reflectometry

Improvement of spatial resolution of Brillouin optical time domain reflectometer using spectral decomposition

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

Performance of Brillouin optical time domain reflectometer with erbium doped fiber amplifier

Single-Mode Input Fiber Combined with Multimode Sensing Fiber Used in Brillouin Optical Time-Domain Reflectometry

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Radiation Effect on EDFA for Inter-Satellite Optical Communication on Low Dose Orbits

BOTDR Optic Fiber Temperature Monitoring Technique and Its Application in Civil Engineering

Fast Acquirable Brillouin Optical Time-Domain Reflectometry Based on Bipolar-Chirped Pulse Pair

Stain monitoring for tunnel using distributed optical fiber BOTDR sensors