Nb-incorporated Fe (oxy)hydroxide Derived from Structural Transformation for Efficient Oxygen Evolution Electrocatalysis

Chizhong Wang,Rong Wang,Yue Peng,Jianjun Chen,Zhen Chen,Haibo Yin,Junhua Li

DOI: https://doi.org/10.1039/d0ta08446h

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:FeNb (oxy)hydroxide derived from structural transformation exhibited an overpotential of 340 mV at 10 mA cm−2 for oxygen evolution electrocatalysis.

What problem does this paper attempt to address?

In Situ Growth of Fe and Nb Co-Doped Β-Ni(oh)2 Nanosheet Arrays on Nickel Foam for an Efficient Oxygen Evolution Reaction

Junjie Pan,Shaoyun Hao,Xingwang Zhang,Rongxin Huang

DOI: https://doi.org/10.1039/d0qi00614a

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:Fe, Nb co-doped β-Ni(OH)2 electrode exhibited excellent OER performance with an overpotential of 294 mV at 100 mA cm−2.
Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Shangkun Deng,Ziliang Li,Kang Xu,Zhu Liu,Zhuangzhuang Yin,Hai Yu,Jianguo Lv,Lei Yang,Zhaoqi Sun,Miao Zhang

DOI: https://doi.org/10.1149/1945-7111/ac18e6

IF: 3.9

2021-01-01

Journal of The Electrochemical Society

Abstract:In this paper, the electrocatalytic efficiency of bi-metallic organic framework compounds grown on nickel foam (NF) has been enhanced by adjusting the amount of iron and cobalt precursors. A unique wedge-like morphology was observed in Fe-1-Co-1-MOF. The optimized Fe-1-Co-1-MOF (1:1 of molar ratio of iron to cobalt) exhibits superior catalytic activity to oxygen evolution reaction (OER) performance with a lowest overpotential of only 233 mV at a current density of 10 mA.cm(-2) and the higher current density of 400 mA.cm(-2) can be provided at overpotential of 264 mV. The Tafel slope in alkaline aqueous solutions was 24.4 mV.dec(-1). After 10 h of continuous operation, the catalyst showed only a slight loss of current density at 50 mA.cm(-2). This success may be attributed to synergy between the bi-metallic organic framework catalyst and the large pores of conductive nickel foam, as well as the synergistic effect between the two phases molecules of the bi-metallic organic framework metal. (C) 2021 The Author(s). Published on behalf of The Electrochemical Society by IOP Publishing Limited.
Hierarchically Devising NiFeOxHy Catalyst with Surface Fe Active Sites for Efficient Oxygen Evolution Reaction

Rong Wang,Chizhong Wang,Sihan Yin,Yue Peng,Jianjun Chen,Yanxi Deng,Junhua Li

DOI: https://doi.org/10.1016/j.cattod.2020.04.013

IF: 5.3

2021-01-01

Catalysis Today

Abstract:Nickel iron (oxy)hydroxide (NiFeOxHy) is among the most active electrocatalysts for oxygen evolution reaction (OER) in the alkaline media. Development of new design strategy for NiFeOxHy electrode with respect to intrinsic activity and number of active species is highly attractive. Here we report a hierarchical fabrication for NiFeOxHy electrode towards efficient oxygen evolution. Three-dimensional mesoporous NiO was initially prepared and reduced to a polycrystalline Ni metal framework. Despite the poor OER activity for Ni-based catalyst, the incorporation of surface Fe species induced a notably high current density for the oxygen evolution. The results indicated that the Fe species, located at outer surface region, played a key role as the OER active sites. It is also found that the surface of metallic Ni was reconstructed to (oxy)hydroxide phase with ease compared to NiO. As a result, a heterostructure composed of an OER-active NiFe (oxy)hydroxide shell and an electron-conductive Ni core was formed. In this fabricated NiFeOxHy/Ni catalyst, the promoted intrinsic activity, number of active sites and charge-transfer ability all taken into account contribute to an efficient OER process.
Fe-Incorporated Nickel-Based Bimetallic Metal-Organic Frameworks for Enhanced Electrochemical Oxygen Evolution

Dan Wang,Fuhe Le,Jing Lv,Xue Yang,Xianhao Chen,Haibin Yao,Wei Jia

DOI: https://doi.org/10.3390/molecules28114366

IF: 4.6

2023-05-26

Molecules

Abstract:Developing cost-effective and high-efficiency catalysts for electrocatalytic oxygen evolution reaction (OER) is crucial for energy conversions. Herein, a series of bimetallic NiFe metal-organic frameworks (NiFe-BDC) were prepared by a simple solvothermal method for alkaline OER. The synergistic effect between Ni and Fe as well as the large specific surface area lead to a high exposure of Ni active sites during the OER. The optimized NiFe-BDC-0.5 exhibits superior OER performances with a small overpotential of 256 mV at a current density of 10 mA cm-2 and a low Tafel slope of 45.4 mV dec-1, which outperforms commercial RuO2 and most of the reported MOF-based catalysts reported in the literature. This work provides a new insight into the design of bimetallic MOFs in the applications of electrolysis.
Fe induced nanostructure reorganization and electronic structure modulation over CoNi (oxy)hydroxide nanorod arrays for boosting oxygen evolution reaction

Chuqiang Huang,Yuhong Zhong,Junxuan Chen,Jian Li,Wei Zhang,Jianqing Zhou,Yuanlu Zhang,Luo Yu,Ying Yu

DOI: https://doi.org/10.1016/j.cej.2020.126304

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Ni- and Co-based (oxy)hydroxides are promising candidates for oxygen evolution reaction (OER), but their limited specific surface area and poor intrinsic conductivity lead to unsatisfied OER activity. Herein, a unique and universal self-template strategy has been developed to fabricate Fe-incorporated CoNi (oxy)hydroxide (Fe-CoNi-OH) nanosheet-assembled nanorod arrays toward OER. The reorganized nanosheet-assembled nanorod hierarchical structure induced by Fe incorporation exposes more active sites and facilitates mass transfer. Furthermore, Fe incorporation modifies the electron structure of CoNi (oxy)hydroxide (CoNi-OH), and enhances its electronic conductivity for rapid electron transport, thus intrinsically enhancing the OER activity. Consequently, the Fe-CoNi-OH possesses excellent OER activity with low overpotentials of 210, 248, 304, and 349 mV to achieve current densities of 10, 100, 500, and 1000 mA cm−2, respectively, along with a very small Tafel slope of 28.0 mV dec−1, which are superior to the CoNi-OH and benchmark RuO2. By paring the Fe-CoNi-OH anode with a CoP cathode, an outstanding alkaline electrolyzer has been constructed, which only requires cell voltages of 1.506 and 1.623 V to deliver current densities of 10 and 100 mA cm−2, respectively, and can stably work for 100 h. This work provides a universal strategy to synthesize Fe-containing hierarchical nanostructured catalysts for energy conversion application.

engineering, chemical, environmental
Uniformly dispersed NiO/FeNi 3 alloy nanoparticles embedded in N-doped porous carbon as electrocatalysts for enhanced oxygen evolution reaction

Jiabo Wang,Jie Zhang,Peng Zhang,Yalin Fu,Zhentao Liu,Baolei Liu,Jibo Zhang,Li Chen

DOI: https://doi.org/10.1016/j.jallcom.2023.172161

IF: 6.2

2023-09-16

Journal of Alloys and Compounds

Abstract:The oxygen evolution reaction (OER) is a key half-reaction in renewable energy-related technologies, such as the electrocatalytic water splitting process and carbon dioxide reduction reaction. Unfortunately, developing an efficient and stable electrocatalyst to overcome the sluggish kinetics of OER remains a challenge. Herein, uniformly dispersed NiO and FeNi 3 alloy nanoparticles anchored on N-doped porous carbon (NC) electrocatalysts were designed and synthesized by a facile two-step calcination strategy. The influence of calcination temperature and the molar ratio of Ni:Fe on electrocatalytic OER activity was particularly studied. With an optimal calcination temperature and Ni/Fe ratio, FeNi 3 @NC-800 exhibited outstanding OER performance with a low overpotential of 242 mV at a current density of 10 mA cm −2 and a small Tafel slope of 34.7 mV dec −1 in alkaline media. The enhanced OER activity of FeNi 3 @NC-800 is mainly due to the synergistic effect of FeNi 3 alloy nanoparticles with NC and the high electrical conductivity between FeNi 3 and NC. This research will offer a new perspective on the construction of efficient and stable non-noble metal OER electrocatalyst.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Bimetallic Oxyhydroxide in Situ Derived from an Fe2Co-MOF for Efficient Electrocatalytic Oxygen Evolution

Xintong Ling,Feng Du,Yintong Zhang,Yan Shen,Wa Gao,Bo Zhou,Zhiyuan Wang,Guoling Li,Tao Li,Qing Shen,Yujie Xiong,Xiaoyong Wang,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1039/d1ta02159a

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Schematic illustration of the synthesis of Fe2Co MOF/NF prepared through a one-pot method growth process and it has excellent OER performance. Color codes: Co (green), Fe (blue), O (red), and C (gray).
Bimetallic oxyhydroxide in situ derived from an Fe 2 Co-MOF for efficient electrocatalytic oxygen evolution

Xintong Ling,Feng Du,Yintong Zhang,Yan Shen,Wa Gao,Bo Zhou,Zhiyuan Wang,Guoling Li,Tao Li,Qing Shen,Yujie Xiong,Xiaoyong Wang,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1039/d1ta02159a

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Schematic illustration of the synthesis of Fe 2 Co MOF/NF prepared through a one-pot method growth process and it has excellent OER performance. Color codes: Co (green), Fe (blue), O (red), and C (gray).

materials science, multidisciplinary,chemistry, physical,energy & fuels
Gd-induced electronic structure engineering of a NiFe-layered double hydroxide for efficient oxygen evolution

Meng Li,Hao Li,Xuechun Jiang,Mengqi Jiang,Xun Zhan,Gengtao Fu,Jong-Min Lee,Yawen Tang

DOI: https://doi.org/10.1039/d0ta10740a

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A novel rare earth hybrid electrocatalyst, consisting of a gadolinium-doped hierarchal NiFe-layered double hydroxide, is developed for improving the OER activity.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Deep Reconstruction of Fe-NiMoO 4 · n H 2 O@NiOOH as Efficient Oxygen Evolution Electrocatalysts

Zhaoyang Liu,Kun Wang,Xinyue Tong,Fanlin Kong,Yali Cao

DOI: https://doi.org/10.1021/acs.energyfuels.2c03732

IF: 4.6541

2023-02-01

Energy & Fuels

Abstract:In electrocatalytic hydrolysis, the oxygen evolution reaction (OER) reaction involves a four-electron transfer process. The complex transfer process reduces the rate of hydrolysis. Therefore, the electrocatalyst with good OER performance is desirable for not only fundamental research but also further application. Transition-metal electrocatalysts, as one of the alternatives to noble-metal catalysts, have abundant reserves and unique d orbital electrons. In particular, transition-metal molybdates undergo dynamic reconstruction at oxidation potentials, and the hydroxyl oxides formed after reconstruction are the main active species for oxygen-related reactions. In this work, we prepared self-supported Fe-doped NiMoO4·nH2O@NiOOH electrocatalysts by hydrothermal reaction and electrochemical oxidation. Porous NiOOH was generated on the surface of NiMoO4·nH2O by electrooxidation, and Fe doping was realized in this process. The porous structure of the surface is conducive to the penetration of the electrolyte, which can accelerate the ion transport rate. The doping of Fe was used to modulate the electronic structure and improve the electrocatalytic activity. The overpotential was only 227 mV at 10 mA/cm2 in the 1 M KOH electrolyte. In addition, the electrocatalyst exhibited high stability at a current density of 20 mA/cm2.

energy & fuels,engineering, chemical
Ultrafine Fe-modulated Ni Nanoparticles Embedded Within Nitrogen-Doped Carbon from Zr-MOFs-confined Conversion for Efficient Oxygen Evolution Reaction

Kong Lingtao,Li Zhouxun,Zhang Hui,Zhang Mengmeng,Zhu Jiaxing,Deng Mingli,Chen Zhenxia,Ling Yun,Zhou Yaming

DOI: https://doi.org/10.1007/s11705-021-2087-1

IF: 4.803

2021-01-01

Frontiers of Chemical Science and Engineering

Abstract:Improvement of the low-cost transition metal electrocatalyst used in sluggish oxygen evolution reaction is a significant but challenging problem. In this study, ultrafine Fe-modulated Ni nanoparticles embedded in a porous Ni-doped carbon matrix were produced by the pyrolysis of zirconium metal-organic-frameworks, in which 2,2′-bipyridine-5,5′-dicarboxylate operating as a ligand can coordinate with Ni2+ and Fe3+. This strategy allows formation of Fe-modulated Ni nanoparticles with a uniform dimension of about 2 nm which can be ascribed to the spatial blocking effect of ZrO2. This unique catalyst displays an efficient oxygen evolution reaction electro-catalytic activity with a low overpotential of 372 mV at 10 mA·cm−2 and a small Tafel slope of 84.4 mV·dec−1 in alkaline media. More importantly, it shows superior durability and structural stability after 43 h in a chronoamperometry test. Meanwhile, it shows excellent cycling stability during 4000 cyclic voltammetry cycles. This research offers a new insight into the construction of uniform nanoscale transition metals and their alloys as highly efficient and durable electrocatalysts.
Fe-incorporated cobalt-based metal-organic framework ultrathin nanosheets for electrocatalytic oxygen evolution

Ming Zhao,Taolian Guo,Wei Qian,Zhe Wang,Xin Zhao,Lili Wen,Daping He

DOI: https://doi.org/10.1016/j.cej.2021.130055

IF: 15.1

2021-10-01

Chemical Engineering Journal

Abstract:Rationally designing highly active electrocatalysts for the oxygen evolution reaction (OER) is exceedingly essential for ecologically sustainable development, but is still a principal research challenge due to the sluggish four-electron kinetics. Due to their structural diversity and ultra-high surface area, metal–organic framework (MOF) ultrathin nanosheets have expected to provide not only more accessible active sites, but also faster mass transfer and diffusion and have been realized as OER electrocatalysts. Therefore, we develop the controllable synthesis of Co-based MOF ultrathin nanosheets (NMOF-Co) incorporated with different-valence Fe ions, which are used as a high-performance electrocatalyst via a post-synthetic modification method. The binary metal electrocatalyst demonstrated more effective kinetics than the single metal electrocatalysts. By virtue, the obtained electrocatalyst with a uniform thickness of ~4.0 nm (defined as (Fe(II)1Fe(III)1)0.6/NMOF-Co) sets in at potential of only 1.56 V with small Tafel slope of 50 mVdec-1, which is more superb than that of RuO2 and bulk material Fe(II)1Fe(III)1)0.6/Bulk-MOF-Co. The findings show that the structure of ultrathin nanosheets and the Fe incorporation are critical to the outstanding performance of MOF nanosheets for tuning the electrocatalytic activity, which is of great significance in the field of MOF electrocatalysis.

engineering, chemical, environmental
Bioinspired NiFe-Gallate Metal-Organic Frameworks for Highly Efficient Oxygen Evolution Electrocatalysis

Min Fang,Xutao Gao,Jing Liang,Biao Guo,Lie Zou,Jun Lu,Yan Gao,Edmund C. M. Tse,Jinxuan Liu

DOI: https://doi.org/10.1039/d2ta01293f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:A bioinspired NiFe-gallate was synthesized on carbon paper. It exhibits superior OER performance with an overpotential of 185 mV at 10 mA cm–2.
Direct thermal annealing synthesis of FeO nanodots anchored on N-doped carbon nanosheet for long-term electrocatalytic oxygen reduction

Meiying Wu,Xiuzhen Wu,Zeming Wang,Bingjie Hu,Huazhang Guo,Baohua Zhang,Liang Wang

DOI: https://doi.org/10.1016/j.electacta.2021.139361

IF: 6.6

2021-12-01

Electrochimica Acta

Abstract:It is highly desired to exploit non-noble metal oxide catalysts for superseding the Pt-based material and achieving long-term oxygen reduction reaction (ORR). Herein, a FeO-based ORR catalyst is firstly designed and synthesized by a one-pot pyrolysis strategy using FeCl3 and N-doped carbon nanosheets (NCNSs) as precursors. The NCNSs substrate play the important role to control the size of gained FeO at nanodot level (near 2.5 nm). The supersmall FeO nanodots, uniformly dispersion on the NCNSs, which enhance the touching areas with the NCNSs substrate and expose richen active sites. The introduction of FeO nanodots improve the graphitization degree of the composite and form Fe-N bonds in FeO/NCNSs, then exhibiting excellent electrocatalytic performance and long-term stability. The catalyst displays a high half-wave potential and small Tafel slope of 0.94 V and 56.9 mV dec−1 in the 4 electron ORR process, respectively. Meanwhile, it demonstrates superior tolerance to methanol. Noting, after 150 h i-t test, the current density only drops by 10.7%, even better than the durability performance of many catalysts after 10 h. The theoretical calculations further reveal that the OH* adsorption on the surface of FeO/NCNSs in real reaction environment is beneficial for embedding the FeO NDs in N6 hollow of NCNSs, which sustains the highly efficient ORR activity under the long-term running conditions. Our work opens a new era for the novel FeO-based ORR catalysts and provides a design reference for the long-term ORR electrode.

electrochemistry
Polyoxometalate-incorporated NiFe-based oxyhydroxides for enhanced oxygen evolution reaction in alkaline media

Yuyan Qiao,Yanqiu Pan,Guifa Long,Wenjun Fan,Fuxiang Zhang

DOI: https://doi.org/10.1039/d4cc03874f

IF: 4.9

2024-09-11

Chemical Communications

Abstract:NiFe-based oxyhydroxides are promising electrocatalysts for the oxygen evolution reaction (OER) in alkaline media, but further enhancing their OER performance remains a significant challenge. Herein, we in situ incorporated polyoxometalates into NiFe oxyhydroxide to form a homogeneous/heterogeneous hybrid material, which induces the electronic interaction between Ni, Fe and Mo sites, as revealed by a variety of characterizations and theoretical calculations. The resulting hybrid electrocatalyst delivers a low overpotential of 203 mV at 10 mA cm-2 and a TOF of 2.34 s-1 at 1.53 V in alkaline media. This work presents a critical step towards developing high-performance OER catalysts by constructing metal-POM hybrids.

chemistry, multidisciplinary
NiFe Layered Double Hydroxide Nanosheets Anchored on Cobalt Nanocrystal Matrixes as Electrocatalysts for Oxygen Evolution

Shuaiwu Zhu,Jianmin Wang,Haijin Li,Jiajia Cai,Yongtao Li,Jing Hu,Yitao He,Yong Zhou

DOI: https://doi.org/10.1021/acsanm.2c02844

IF: 6.14

2022-09-07

ACS Applied Nano Materials

Abstract:One crucial pattern to vigorously develop renewable energy is to exploit high-performance oxygen evolution reaction (OER) electrocatalysts. Therefore, we constructed a nanoscale heterogeneous structure catalyst, NiFe-LDH/Co-NC (LDH = layered double hydroxide; Co-NC cobalt nanocrystal), consisting of ultrasmall NiFe-LDH nanosheets and Co-NC matrixes carbonized from ZIF-67. In 1 M KOH, NiFe-LDH/Co-NC-2 requires only an overpotential of 282 mV to catalyze a current density of 10 mA cm–2 and also has a Tafel slope of 64 mV dec–1, surpassing those of the typical OER electrocatalyst RuO2. Co-NC was able to supply a porous structure and anchoring sites, including improving the electrical conductivity of NiFe-LDH. Modified NiFe-LDH has a highly dispersed nature and therefore exposes more active sites. Moreover, the accelerated electron-transfer process caused by strong interaction between NiFe-LDH and Co-NC dramatically optimized the energy barrier of the OER. This work provides significant guidelines to design a high-performance OER of NiFe-LDH catalysts.

materials science, multidisciplinary,nanoscience & nanotechnology
Ultralow Iridium-Incorporated Ni-Fe Bimetallic-Organic Framework for Efficient Oxygen Evolution Reaction

Zixiong Wang,Zhaoxin Zhou,Qi Zhang,He Zhu,Shiping Zhu

DOI: https://doi.org/10.1039/d4cc03818e

IF: 4.9

2024-09-19

Chemical Communications

Abstract:The development of electrocatalysts is of vital importance to OER. In this work, an optimized MOF electrode, Ir-NiFe-btz/NF, was synthesized by incorporating ultralow level of Ir nanoparticles into an ionic bimetallic MOF. Under the alkaline condition, the prepared MOF electrode demonstrated outstanding OER activity and stability with a low overpotential of 182 mV to reach 10 mA cm-2 and no obvious increase of overpotential in chronovoltammetry test over 100 hours at 100 mA cm-2.

chemistry, multidisciplinary
Interface engineered NiFe2O4−x/NiMoO4 nanowire arrays for electrochemical oxygen evolution

Juhyung Choi,Daekyu Kim,Weiran Zheng,Bingyi Yan,Yong Li,Lawrence Yoon Suk Lee,Yuanzhe Piao

DOI: https://doi.org/10.1016/j.apcatb.2020.119857

2021-06-01

Abstract:Designing highly active and stable electrocatalysts for oxygen evolution reaction (OER) is the key to success in sustainable water splitting reaction, a sustainable route towards high purity hydrogen production. Interface engineering is one of the most effective strategies for modulating the local electronic structure of active sites to enhance catalytic activity. Herein, NiFe2O4−x nanoparticles were integrated to NiMoO4 nanowires (NiFe2O4−x/NMO) grown on nickel foam to construct an extended interface with strong electronic interactions. The NiFe2O4−x/NMO demonstrates high OER activities as manifested by a low overpotential of 326 mV at a high current density of 600 mA cm−2 and good long-term stability. The intimate interface between NiFe2O4−x and NiMoO4 is responsible for the Fe-facilitated phase transition to active γ-NiOOH phase as revealed by in situ Raman spectroelectrochemical studies. This study outlines how the interface design of integrated nanostructures can optimize the formation of active phase for enhanced catalytic activity.

chemistry, physical,engineering, chemical, environmental
FeCoNi molybdenum-based oxides for efficient electrocatalytic oxygen evolution reaction

Weikai Fan,Chaofan Liu,Hairong Wang,Jiang Wu,Sheng Chen,Weijie Fang,Chenyu Wu,Yuyue Quan,Daolei Wang,Yongfeng Qi

DOI: https://doi.org/10.1016/j.jcis.2024.02.104

2024-05-15

Abstract:The search for highly efficient and inexpensive electrocatalysts is crucial to the advancement of environmentally friendly and sustainable energy sources. Here, adopting a one-step hydrothermal method, we have effectively fabricated a self-supported multi-metal molybdenum-based oxide (FeCoNi-MoO4) on nickel foam (NF). In addition to changing the catalyst's microstructure, the introducing of Fe and Co, enhanced its active center count, improved its electronic structure, and in turn reduced the difficulty for high-valence Ni and Fe species to form, which accelerates the oxygen evolution reaction (OER) kinetics by promoting the development of the actual active materials, NiOOH and FeOOH. FeCoNi-MoO4 has outstanding OER performance, requiring just 204 mV overpotentials at 10 mA cm-2 and 271 mV at 100 mA cm-2. Its exceptional OER kinetics at both low and high currents are indicated by a Tafel slope of 50.6 mV dec-1, which is attributed to the combined effect of its multi-metal composition and a higher number of active sites. Moreover, the FeCoNi-MoO4 electrode was operated continuously for over 48 h. Furthermore, the density functional theory (DFT) results demonstrated that the introducing of Fe and Co, which quickens the rate of electron transfer during the electrocatalytic process, improves the ability of oxygen intermediate species to adsorb, and ultimately lowers the overpotential, is responsible for the increased electrocatalytic activity of FeCoNi-MoO4. This work offers hope for further developments in the sector by proposing an efficient approach for creating multi-active electrocatalysts that are stable, economical, and efficient.
Interface‐Engineered Ni(OH)2/β‐like FeOOH Electrocatalysts for Highly Efficient and Stable Oxygen Evolution Reaction

Kaijian Zhu,Wenjun Luo,Guoxiang Zhu,Jun Wang,Yongfa Zhu,Zhigang Zou,Wei Huang

DOI: https://doi.org/10.1002/asia.201700964

2017-01-01

Chemistry - An Asian Journal

Abstract:Iron-based (oxy)hydroxides are especially attractive electrocatalysts for the oxygen evolution reaction (OER) owing to their earth abundance, low cost, and nontoxicity. However, poor OER kinetics on the surface restricts the performance of the FeOOH electrocatalyst. Herein, a highly efficient and stable Ni(OH)(2)/beta-like FeOOH electrocatalyst is obtained by facile electroactivation treatment. The activated Ni(OH)(2)/beta-like FeOOH sample indicates an overpotential of 300 mV at 10 mAcm(-2) for the OER, and no clear current decay after 50 h of testing; this is comparable to the most efficient nickel- and cobalt-based electrocatalysts on planar substrates. Furthermore, studies suggest that beta-like FeOOH plays a key role in remarkably enhancing the performance during the electroactivation process owing to its metastable tunnel structure with a lower barrier for interface diffusion of Ni2+ ions between the bilayer electrocatalyst. This study develops a new strategy to explore efficient and low-cost electrocatalysts and deepens understanding of bilayer electrocatalysts for the OER.

Nb-incorporated Fe (oxy)hydroxide Derived from Structural Transformation for Efficient Oxygen Evolution Electrocatalysis

In Situ Growth of Fe and Nb Co-Doped Β-Ni(oh)2 Nanosheet Arrays on Nickel Foam for an Efficient Oxygen Evolution Reaction

Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Hierarchically Devising NiFeOxHy Catalyst with Surface Fe Active Sites for Efficient Oxygen Evolution Reaction

Fe-Incorporated Nickel-Based Bimetallic Metal-Organic Frameworks for Enhanced Electrochemical Oxygen Evolution

Fe induced nanostructure reorganization and electronic structure modulation over CoNi (oxy)hydroxide nanorod arrays for boosting oxygen evolution reaction

Uniformly dispersed NiO/FeNi 3 alloy nanoparticles embedded in N-doped porous carbon as electrocatalysts for enhanced oxygen evolution reaction

Bimetallic Oxyhydroxide in Situ Derived from an Fe2Co-MOF for Efficient Electrocatalytic Oxygen Evolution

Bimetallic oxyhydroxide in situ derived from an Fe 2 Co-MOF for efficient electrocatalytic oxygen evolution

Gd-induced electronic structure engineering of a NiFe-layered double hydroxide for efficient oxygen evolution

Deep Reconstruction of Fe-NiMoO 4 · n H 2 O@NiOOH as Efficient Oxygen Evolution Electrocatalysts

Ultrafine Fe-modulated Ni Nanoparticles Embedded Within Nitrogen-Doped Carbon from Zr-MOFs-confined Conversion for Efficient Oxygen Evolution Reaction

Fe-incorporated cobalt-based metal-organic framework ultrathin nanosheets for electrocatalytic oxygen evolution

Bioinspired NiFe-Gallate Metal-Organic Frameworks for Highly Efficient Oxygen Evolution Electrocatalysis

Direct thermal annealing synthesis of FeO nanodots anchored on N-doped carbon nanosheet for long-term electrocatalytic oxygen reduction

Polyoxometalate-incorporated NiFe-based oxyhydroxides for enhanced oxygen evolution reaction in alkaline media

NiFe Layered Double Hydroxide Nanosheets Anchored on Cobalt Nanocrystal Matrixes as Electrocatalysts for Oxygen Evolution

Ultralow Iridium-Incorporated Ni-Fe Bimetallic-Organic Framework for Efficient Oxygen Evolution Reaction

Interface engineered NiFe2O4−x/NiMoO4 nanowire arrays for electrochemical oxygen evolution

FeCoNi molybdenum-based oxides for efficient electrocatalytic oxygen evolution reaction

Interface‐Engineered Ni(OH)2/β‐like FeOOH Electrocatalysts for Highly Efficient and Stable Oxygen Evolution Reaction