The Effect of Ca2+ Concentrations on the Characteristics of Mg(OH)2-based Building Materials Prepared in Situ by Electrodeposition

Bin Li,Zhengwu Jiang,Gan Zhou,Qing Chen

DOI: https://doi.org/10.1016/j.conbuildmat.2020.121523

IF: 7.4

2021-01-01

Construction and Building Materials

Abstract:Preparing Mg(OH)(2)-based materials by electrodeposition is a promising way to manufacture building materials in Mg2+-containing aqueous environments. This paper aims to test the feasibility of this method and study the impact of Ca2+ concentration on the properties of the deposit materials. The mass, thickness, and apparent density of the deposits were tested, and the composition and microstructure of the deposits were investigated by X-Ray diffractometry, scanning electron microscopy, low temperature nitrogen adsorption, and electrochemical impedance spectrum. When the Ca2+ concentration in the aqueous environment is below 0.0167 mol L-1, Mg(OH)(2)-based materials can form on the cathode, and the mass and thickness of the material increased with the Ca2+ concentration. Mg(OH)(2) form layered structures in the micro-scale, and a small number of CaCO3, including aragonite in a region near the electrode and calcite in a further region, precipitate in between the Mg(OH)(2) layers. Within each layer, nano-pores remain in between the Mg(OH)(2) crystals, and the porosity of the bulk material decreased with the Ca2+ concentration, leading to an increased apparent density and thus an improved anticorrosion performance. When the Ca2+ concentration in the aqueous environment reaches >= 0.05 mol L-1, the materials formed on the electrode will spall due to the formation of portlandite, and thus the deposition process will be less efficient. (C) 2020 Elsevier Ltd. All rights reserved.