Abstract:Biodegradable implants are a new concept to substitute current nondegradable medical materials. The biodegradable implant can decompose in the patients' body when the treatment is finished and be discharged through metabolism. Mg alloys, with their biocompatibility and high reactivity, meet the requirements of a biodegradable material. Also, Mg has a similar density to the human bones and the lowest elastic modulus among the structural metallic biomaterials, which can mitigate the stress shielding effect. For Mg-Zn-Ca alloys, besides the merits of Mg, Zn is related to bone metabolism and osteopathic phosphate activity, while Ca is the main element of bones that is essential for the synthesis of bone compounds. However, the degradation rate of Mg alloy implants needs to be controlled, or the implant may corrode too fast, causing local hydrogen accumulation and alkalization that hurts the patients. One of the effective ways to improve the alloy corrosion resistance is by coating. Ca-P coatings, such as brushite (dicalcium phosphate dihydrate, DCPD) and hydroxyapatite (HA), can mitigate the degradation rate of Mg alloys and show good biocompatibility and osseointegration. Electrodeposition is a simple way to synthesize coatings on metallic materials with an easy experimental set-up, and the process parameters are highly controllable. Even though there are plenty of reports about the fabrication of Ca-P coatings on Mg alloys through electrodeposition, few of them focus on the film formation mechanism. Issues related to coating defect formation and inhomogeneity are rarely discussed. Therefore, this report focuses on the film formation mechanism and the relationship to the defects of the electrodeposited DCPD coating on a Mg-2.5wt%Zn-1wt%Ca alloy. By altering the deposition potential, the reduction reactions that proceed on the substrate are different. The involvement of H 2 O reduction affects the formation of DCPD and changes the microstructure of the coating. Combining electrochemical tests and microstructure analysis, the corrosion properties of the coatings are measured, and the results are linked to the difference in film microstructure and defects. With SEM/FIB cross-sectional observations, the formation mechanism of the coatings and the relationship to the process condition will be discussed. The degradation rate of Mg alloys can be tuned by understanding the DCPD film formation mechanism and the cause of the defects.

Deposition of anti-corrosion hybrid film of hexamethylene diaminetetrakis (methylene phosphonic acid)/hydroxyapatite on biodegradable Mg: Influence of deposition procedures

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

Effects of hydroxyapatite coatings on enhanced corrosion protection and cytocompatibility of high-purity magnesium

(Digital Presentation) Formation Mechanism and Defects of Electrodeposited Ca-P Coating on Biodegradable Mg-Zn-Ca Alloy

Effects of composition and hierarchical structures of calcium phosphate coating on the corrosion resistance and osteoblast compatibility of Mg alloys

Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior

Hybrid Coatings for Active Protection against Corrosion of Mg and Its Alloys

A Biodegradable Coating Based on Self‐Assembled Hybrid Nanoparticles to Control the Performance of Magnesium

Microstructure and Corrosion Behavior of Thermal-Sprayed Hydroxyapatite/Magnesium Composite Coating on the Surface of AZ91D Magnesium Alloy

Controlling the Degradation Rate of Biodegradable Mg–Zn-Mn Alloys for Orthopedic Applications by Electrophoretic Deposition of Hydroxyapatite Coating

Evaluating the Electrochemical and In Vitro Degradation of an HA-Titania Nano-Channeled Coating for Effective Corrosion Resistance of Biodegradable Mg Alloy

Electrodeposition of Hydroxyapatite Coating on AZ91D Magnesium Alloy for Biomaterial Application

Corrosion resistance of glucose-induced hydrothermal calcium phosphate coating on pure magnesium

Preparation of poly(ε‐caprolactone)‐hydroxyapatite composite coating for improvement of corrosion performance of biodegradable magnesium

Enhancing corrosion resistance of biodegradable magnesium with dicalcium phosphate dihydrate and Chlorella sp. biomass

Preparation and in Vitro Degradation of the Composite Coating with High Adhesion Strength on Biodegradable Mg–Zn–Ca Alloy

Tailoring Biodegradation of Mg-Ca Alloy by Acid Pickling and Polydioxanone/n-Hydroxyapatite Composite Coating for Temporary Implant Applications

Fabrication and Characterization of Rod-Like Nano-Hydroxyapatite on MAO Coating Supported on Mg–Zn–Ca Alloy

Preparation of phosphate ion-doped Zn–Fe-layered double hydroxide with corrosion resistance and inducing Ca–P deposition on AZ31 Mg alloy

A novel Ca-Mg-P/PDA composite coating of Mg alloys to improve corrosion resistance for orthopedic implant materials

Electrospun Polycaprolactone Coating of Hydroxyapatite Reinforced Magnesium Composites for Biodegradable Implant Applications