Abstract:In the present work, magnesium-calcium deficient nano hydroxyapatite (Mg-CDHA) lamellar composites with 5, 10 and 15 wt. % CDHA of crystallite size 32 nm were produced by ball milling and sintering. The Mg laminas were uniformly covered with CDHA crystals after 20 h of milling as confirmed by transmission electron microscopy. Enhanced biomineralisation was confirmed from X-ray diffraction method for the composites after 72 h of immersion in simulated body fluid (SBF). Degradation studies carried out by weight loss method and electrochemical tests in SBF clearly indicated the increased corrosion resistance for the composites with 10%HA compared to other combinations. The corrosion current values were observed as decreased (1.98 × 10 −5 μA/cm 2 ) for Mg-10%HA compared with other composites and pure Mg. Micro-lamellar structure and the deposited mineral phases from the simulated body fluids made the composite with 10% HA as optimum for biodegradable medical scaffold applications. Le développement de composites à base de Mg pour des applications d'implants dégradables fait partie des domaines de recherche potentiels en génie biomédical. Dans le travail en cours, des composites lamellaires de nanohydroxyapatite (Mg-CDHA) déficients en magnésium et calcium avec 5, 10 et 15% en poids de CDHA à taille de cristallite de 32 nm ont été produits par broyage à boulets et frittage. Les lamelles de Mg étaient recouvertes uniformément de cristaux de CDHA après 20 h de broyage, tel que confirmé par microscopie électronique en transmission. On a observé la présence de CDHA aux interfaces lamelles-grains dans les composites. On a confirmé une biominéralisation améliorée par la méthode de diffraction des rayons X des composites après 72 h d'immersion dans un liquide organique simulé (SBF). On a réalisé des études de dégradation par la méthode de perte de poids et les essais électrochimiques dans le SBF ont indiqué clairement la résistance accrue à la corrosion des composites avec 10% HA par rapport aux autres combinaisons. On a observé que les valeurs du courant de corrosion avaient diminué (1.98 × 10 −5 μA/cm 2 ) pour le Mg-10%HA par rapport aux autres composites et au Mg pur. La résistance accrue à la corrosion des composites a été attribuée au rôle positif de la structure microlamellaire et aux phases minérales déposées à partir des liquides organiques simulés, ce qui rend le composite contenant 10% HA optimal pour les applications d'échafaudages médicaux biodégradables.

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy

Microstructure, mechanical property, bio-corrosion and cytotoxicity evaluations of Mg/HA composites

Investigating the mechanical properties and corrosion resistance of extruded Mg-1Zn-xCaO (x=0, 0.5, 1.0 wt%) materials

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

In Vitro Degradation and Biocompatibility of Mg-Li-Ca Alloys—the Influence of Li Content

Improvement of the mechanical properties and corrosion resistance of biodegradable β-Ca3(PO4)2/Mg-Zn composites prepared by powder metallurgy: the adding β-Ca3(PO4)2, hot extrusion and aging treatment

Investigation of bioactivity and biodegradability of Mg-bioceramic implants: An in vitro study for biomedical applications

Microstructure, anticorrosion, biocompatibility and antibacterial activities of extruded Mg−Zn−Mn strengthened with Ca

Corrosion Of, and Cellular Responses to Mg–Zn–Ca Bulk Metallic Glasses

Corrosion of magnesium and magnesium–calcium alloy in biologically-simulated environment

Biodegradation and Cell Behavior of a Mg-Based Composite with Mesoporous Bioglass

In vitro degradation, haemolysis and cytotoxicity study of Mg-0.4Ce/ZnO2 nanocomposites

In Vitro and in Vivo Biodegradation and Biocompatibility of an MMT/BSA Composite Coating Upon Magnesium Alloy AZ31

Corrosion Resistance and Cytotoxicity of a MgF2 Coating on Biomedical Mg–1Ca Alloy Via Vacuum Evaporation Deposition Method

The Development of Binary Mg-Ca Alloys for Use As Biodegradable Materials Within Bone

In Vitro Corrosion and Cytocompatibility of A Microarc Oxidation Coating and Poly(L-Lactic Acid) Composite Coating on Mg-1li-1ca Alloy for Orthopedic Implants

The effect of Co-encapsulated GNPs-CNTs nanofillers on mechanical properties, degradation and antibacterial behavior of Mg-based composite

In Vitro and in Vivo Studies on As-Extruded Mg- 5.25Wt.%zn-0.6Wt.%ca Alloy As Biodegradable Metal

In Vitro Studies Regarding the Effect of Cellulose Acetate-Based Composite Coatings on the Functional Properties of the Biodegradable Mg3Nd Alloys

Influence of Biocompatible Metal Ions (ag, Fe, Y) on the Surface Chemistry, Corrosion Behavior and Cytocompatibility of Mg-1ca Alloy Treated with Mevva

Developing micro-lamellar composites of magnesium-calcium deficient nanohydroxyapatite by powder metallurgy route: in vitro degradation studies