Abstract:One of the advantages of perovskite solar cells is able to be compatible with low-cost large-scale solution process via roll-to-roll technique. Green solvent engineering plays an important role in large-scale manufacture. N-methyl pyrrolidone (NMP) is considered to be low toxicity and biodegradable, which is less harmful to the human body and the environment. However, it is difficult to achieve high film quality for NMP-processed perovskite film in a short time. In this communication, we develop a two-step green anti-solvent engineering to fast tune the morphology of the NMP-processed perovskite film. The first step is to deposit ethyl acetate (EA) on top of the precursor film to induce fast nucleation. Secondly, methylammonium chloride (MACl) solution dissolved in isopropanol (IPA) is added to affect the crystal growth process and subsequently form a two-layer structured perovskite film including MAPbI3 as a bottom layer and mixed MAPbI3/MAPbIxCl1-x as an upper layer, respectively. The upper layer shows significantly enhanced degree of crystallinity and reduced trap states. It has been recognized that MAPbIxCl1-x has a wide bandgap with a higher LUMO level and a lower HOMO level than that of MAPbI3. Thus, the enrichment of Cl based perovskite near/at the surface can not only promote the efficient charge transfer, but also improve the VOC of PSCs. Furthermore, the limited content of MAPbIxCl1-x in MAPbI3 barely affects the whole absorption of the perovskite and thus JSC of the device. Thus, the as-prepared inverted PSC yields a high PCE of 16%, mainly attributing to obviously improved VOC and JSC, while the reference device containing the perovskite layer only treated by EA shows a PCE of 14.36%. Notably, NMP-processed perovskite film exhibits high transmittance of 22% in the 380−780 nm wavelength range, offering great potential in semi-transparent PSCs.

Improvement in Solar Cell Efficiency Based on the MAPbI3 Films Extracted by a Mixed Anti-Solvent

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

A Feasible and Effective Post-Treatment Method for High-Quality CH3NH3PbI3 Films and High-Efficiency Perovskite Solar Cells

Mixed antisolvents assisted treatment of perovskite for photovoltaic device efficiency enhancement

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

Improvement of Perovskite CH 3 NH 3 PbI 3 Films on Crystallization for Efficient Perovskite Solar Cells with Low-Temperature Anti-solvent Approach

Solvent-Induced Textured Structure and Improved Crystallinity for High Performance Perovskite Solar Cells

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Bifunctional ionic liquid for enhancing efficiency and stability of carbon counter electrode-based MAPbI3 perovskites solar cells

Optimization of the Anti-Solvent Method for the Fabrication of Cu Electrode-Based High-Efficiency Perovskite Solar Cell

Ambient Air Condition for Room-Temperature Deposition of MAPbI Films in Highly Efficient Solar Cells.

A Compact And Smooth Ch3nh3pbi3 Film: Investigation Of Solvent Sorts And Concentrations Of Ch3nh3i Towards Highly Efficient Perovskite Solar Cells

Improving stability of perovskite solar cells using BMIMBF 4 /IPA as green mixed anti-solvent

Influence of drying temperature on morphology of MAPbI$_3$ thin films and the performance of solar cells

Highly efficient (200) oriented MAPbI3 perovskite solar cells

Improving stability and efficiency of three-dimensional perovskite solar cells with organophosphorus ligands

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

All-round performance improvement of semitransparent perovskite solar cells by a pressure-assisted method

Impacts of MAPbBr3 Additive on Crystallization Kinetics of FAPbI3 Perovskite for High Performance Solar Cells