Abstract:To improve the microstructure of low-temperature-processed CsPbIBr2 films, a chlorobenzene (CB) and isopropyl alcohol (IPA) mixed solution is used as an antisolvent to fabricate CsPbIBr2 films. It is found that the modified film by the mixed antisolvent demonstrates a better morphology, crystallinity, absorption of sunlight, less trap-state density (Ntrap), and suppressed carrier recombination. The modified perovskite solar cells (PSCs) without a hole-transport layer (HTL) achieve a champion efficiency of 7.05%, being much higher by 28.18% than that of the Reference-PSCs without an antisolvent. Moreover, the HTL of undoped zinc phthalocyanine (ZnPc) prepared by solution processing is used to promote charge transfer and protect the CsPbIBr2 film from damage caused by humid air at the CsPbIBr2/carbon interface. The best PSC with a structure of FTO/TiO2/CsPbIBr2/ZnPc/carbon yields a champion efficiency of 8.48% (Reference-PSC, 5.50%) with an open-circuit voltage of 1.23 V. The modified PSCs without encapsulation demonstrate improved humidity stability and retain about 90% (Reference-PSC, ∼70%) of their initial efficiency after storage at a 20% relative humidity in air for 30 days. In addition, the modified PSCs possess good light and thermal stability. Our work provides a feasible low-temperature (150 °C) process to prepare CsPbIBr2 films with the preferred orientation and stable, efficient all-inorganic PSCs (200 °C).The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c03554.Photovoltaic parameters, PCE, and J–V curves of the devices treated with the CI antisolvent with different IPA:CB volume ratios; photovoltaic parameters, PCE, and J–V curves of CI-ZnPc-PSCs with different ZnPc concentrations; summary of low-temperature-processed carbon-based all-inorganic CsPbIBr2 PSCs reported in recent years; photographs of color evolution of the Reference-, CI-, IPA-, and CB-films treated at 30 °C for 600 s; thickness of the Reference-film and the CI-film measured by an ellipsometer (PDF)This article has not yet been cited by other publications.

Improvement of Perovskite CH 3 NH 3 PbI 3 Films on Crystallization for Efficient Perovskite Solar Cells with Low-Temperature Anti-solvent Approach

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

A Feasible and Effective Post-Treatment Method for High-Quality CH3NH3PbI3 Films and High-Efficiency Perovskite Solar Cells

Solvent Annealing of PbI2 for the High-Quality Crystallization of Perovskite Films for Solar Cells with Efficiencies Exceeding 18.

Optimization of the Anti-Solvent Method for the Fabrication of Cu Electrode-Based High-Efficiency Perovskite Solar Cell

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Improving Crystallization and Stability of Perovskite Solar Cells Using a Low-Temperature Treated A-Site Cation Solution in the Sequential Deposition

Improving the Stability and Efficiency of Perovskite Solar Cells by Controlling the Crystallization Active Layer with Binary Anti-solvent

Crystallization Kinetics of Perovskite Films by a Green Mixture Antisolvent for Efficient NiO x -Based Inverted Solar Cells

A Two-Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films Toward Highly Reproducible Perovskite Solar Cells

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

New Low-Temperature Solution Processes to Control the Formation of Perovskite Films for Achieving High Performance Solar Cells

A Compact And Smooth Ch3nh3pbi3 Film: Investigation Of Solvent Sorts And Concentrations Of Ch3nh3i Towards Highly Efficient Perovskite Solar Cells

Improved Crystallization of Perovskite Films by Optimized Solvent Annealing for High Efficiency Solar Cell.

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Influence of drying temperature on morphology of MAPbI$_3$ thin films and the performance of solar cells

Improving the Efficiency of Perovskite Solar Cells Through Optimization of the CH 3 NH 3 PbI 3 Film Growth in Solution Process Method

Crystallization of HC(NH2)2PbI3 Black Polymorph by Solvent Intercalation for Low Temperature Solution Processing of Perovskite Solar Cells

Influence of Drying Temperature on Morphology of MAPbI3 Thin Films and the Performance of Solar Cells

Controlled Growth of Textured Perovskite Films Towards High Performance Solar Cells

A Mixed Antisolvent-Assisted Crystallization Strategy for Efficient All-Inorganic CsPbIBr 2 Perovskite Solar Cells by a Low-Temperature Process