Abstract:Silicon carbide particle-reinforced aluminum matrix (SiCp/Al) composites are significant lightweight metal matrix composites extensively utilized in precision instruments and aerospace sectors. Nevertheless, the inclusion of rigid SiC particles exacerbates tool wear in mechanical machining, resulting in a decline in the quality of surface finishes. This work undertakes a comprehensive investigation into the problem of tool wear in SiCp/Al composite materials throughout the machining process. Initially, a comprehensive investigation was conducted to analyze the effects of cutting velocity vc, feed per tooth fz, milling depth ap, and milling width ae on tool wear during high-speed milling under SCCO2-MQL (Supercritical Carbon Dioxide Minimum Quantity Lubrication) ultrasonic vibration conditions. The results show that under the condition of SCCO2-MQL ultrasonic vibration, proper control of milling parameters can significantly reduce tool wear, extend tool service life, improve machining quality, and effectively reduce blade breakage and spalling damage to the tool, reduce abrasive wear and adhesive wear, and thus significantly improve the durability of the tool. Furthermore, a prediction model for tool wear was developed by employing the orthogonal test method and multiple linear regression. The model's relevance and accuracy were confirmed using F-tests and t-tests. The results show that the model can effectively predict tool wear, among which cutting velocity vc and feed rate fz are the key parameters affecting the prediction accuracy. Finally, a genetic algorithm was used to optimize the milling parameters, and the optimal parameter combination (vc = 60.00 m/min, fz = 0.08 mm/z, ap = 0.20 mm) was determined, and the optimized milling parameters were tested. Empirical findings suggest that the careful selection of milling parameters can significantly mitigate tool wear, extend the lifespan of the tool, and enhance the quality of the surface. This work serves as a significant point of reference for the processing of SiCp/Al composite materials.

Cutting performance in the helical milling of stone-plastic composite with diamond tools

A Machining Science Approach to Dental Cutting of Glass Ceramics Using an Electric Handpiece and Diamond Burs

Effects of Milling Methods on Cutting Performance of Wood–Plastic Composites Based on Principal Component Analysis

Machinability of Different Wood-Plastic Composites during Peripheral Milling

Optimization of Machining Parameters for Milling Zirconia Ceramics by Polycrystalline Diamond Tool

Cutting performance and tool wear mechanism of corrugated helical PCD tool in milling Cf/SiC composites

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Energy Efficiency Optimization for Machining of Wood Plastic Composite

Cutting performance and wear behavior of diamond, coated cemented carbide and PCBN tools during milling of C f /SiC composites

Investigation on Cutting Power of Wood–Plastic Composite Using Response Surface Methodology

Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

Experimental Study on High-Speed Milling of SiCf/SiC Composites with PCD and CVD Diamond Tools

The Study on the Effect of Various Tool Wear Indicators on the Machining of MMCs

Optimization of Tool Wear and Cutting Parameters in SCCO2-MQL Ultrasonic Vibration Milling of SiCp/Al Composites

Effect of cooling and lubrication conditions on the variable angle milling of unidirectional CFRP with PCD Tools

Influences of Clearance Angle and Point Angle on Drilling Performance of 2D Cf/SiC Composites Using Polycrystalline Diamond Tools

Investigation of milling performance and removal process mechanism of 3D SiCf/C-SiC composites using brazed diamond tools

The Study on the Influence of Worn Tool Geometry on the Cutting Process of Ceramic Particle Reinforced Composites

Optimization of tungsten carbide processing parameters for laser heating and ultrasonic vibration composite assisted cutting

Cutting Force Model of Ultrasonic Elliptical Vibration-Assisted Helical Milling of SiCp/Al Composites

Built-up edge formation mechanisms in orthogonal cutting of wood-plastic composite