Abstract:Dual-fuel combustion is an effective method to utilize methanol because of its high octane number and latent heat of evaporation. Two ways to use methanol are discussed. One is port-injected high reactivity fuel and directed-injected methanol, named as active-thermal atmosphere combustion (ATAC). The other is port-injected methanol and direct-injected high reactivity fuel, which is reactivity-controlled compression ignition (RCCI). In the current work, both methanol combustion modes were investigated in an optical engine. Several optically diagnostic methods were utilized to characterize flame features, including flame natural luminosity imaging, OH* natural luminosity imaging and two-color method by wavelength integration. Meantime, the chemical kinetics simulation was also combined to investigate the effects of active atmosphere and thermal atmosphere on methanol combustion. Results show that as for methanol ATAC, when the methanol is direct-injected during the low temperature heat release (LTHR) stage of n-heptane, it causes significant effects on the combustion phasing of the following high temperature heat release (HTHR). When the methanol is direct-injected during the HTHR stage of n-heptane, the single-peak HTHR turns to the double-peak HTHR. Besides, the yellow diffusion flame of methanol can also be observed. Affected by the in-cylinder vortex, the area and intensity of the OH* signal in the vortex squeeze zone are greater than those in the vortex stretch zone. The flame temperature of methanol maintains in 1800–2500 K at CA50 (the crank angle of 50% mixtures is burned completely), while the maximum KL factor maintains in 0.04–0.05. The thermal atmosphere created by the n-heptane combustion has the dominant effects on shortening the ignition delay of methanol. The effects of active atmosphere are limited. As for methanol/high reactivity fuel RCCI, because of the existence of homogeneous low reactivity methanol, the misfire condition occurs when the direct injection (DI) timing is late. With the DI timing of high reactivity fuel advancing, the combustion stability improves. But the flame development progress is mainly low-speed flame propagation, which results in long combustion duration. The combustion characteristics can be further improved by utilizing higher reactivity fuel, such as n-dodecane, specifically, the combustion phasing advances and the number of auto-ignition spots increases.

LES/TPDF Investigation of the Effects of Ambient Methanol Concentration on Pilot Fuel Ignition Characteristics and Reaction Front Structures

Investigation of the Mechanism Behind the Surge in Nitrogen Dioxide Emissions in Engines Transitioning from Pure Diesel Operation to Methanol/diesel Dual-Fuel Operation

Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures: A large-eddy simulation

Large-eddy simulation of the injection timing effects on the dual-fuel spray flame

Optical diagnostics and chemical kinetic analysis on the dual-fuel combustion of methanol and high reactivity fuels

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Investigation of Methanol Ignition Phenomena Using a Rapid Compression Machine

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine

Experimental Study on Combustion Characteristics of a Fischer‐tropsch Diesel/methanol Reactivity Controlled Compression Ignition Mode Engine

Investigation of the Effect of Ammonia Addition on the Two-Stage Ignition Process of Dimethyl Ether Based on Chemical Kinetic Analysis

Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine

Combustion characteristics of methanol engine applying TJI-HPDI with optimized pre-chamber nozzle structure under different injection and spark strategy

Investigation of combustion characteristics, physical and chemical ignition delay of methanol fuel in a heavy-duty turbo-charged compression ignition engine

Study of methanol spray flame structure and combustion stability mechanisms by optical phenomenology and chemical kinetics

Ignition Dynamics of DME/methane-air Reactive Mixing Layer under Reactivity Controlled Compression Ignition Conditions: Effects of Cool Flames

Visualization study on lean combustion characteristics of the premixed methanol by the jet ignition of an ignition chamber

Optical Study on the Effects of Methane Equivalence Ratio and Diesel Injection Mass on Diesel-Ignited Methane Combustion Process

Effects of injection and spark timings on combustion, performance and emissions (regulated and unregulated) characteristics in a direct injection methanol engine

Combustion characteristics of n-heptane spray combustion in a low temperature reform gas/air environment

Numerical Study on Three-Stage Ignition of Dimethyl Ether by Hot Air under Engine-Relevant Conditions

Effects of Diluents on the Ignition of Premixed H2/air Mixtures