Abstract:The use of industrial solid waste to prepare cementitious materials can not only solve the pollution problem of ecological environment, but also help carbon emission reduction and sustainable development. In this work, typical alkaline solid waste - red mud (RM), sulfate solid waste - desulfurization gypsum (DG) and siliconaluminum character solid waste - fly ash (FA) were used to prepare cementitious materials. The influence of synergistic effect of RM-DG-FA on the mechanical performances and hydration products of cementitious materials were systematically investigated. The hydration products were characterized and analyzed by XRD, TG, FTIR, MIP and SEM-EDS. It was found that the mechanical performances of cementitious materials were significantly improved under the synergistic effect of three kinds of solid wastes. When the content of the three solid wastes was 50%, the compressive strength of the cementitious materials at 28 d was 50.60 MPa, and the mechanical performances at each age were higher than the # 42.5 Portland cement standard. The microstructure results showed that under the synergistic action of alkali and sulfate, the active silicon and aluminum substances in RM and FA can quickly participate in the reaction, which makes the hydration degree of cementitious materials can move to the reaction direction with higher polymerization degree. The hydration products mainly included ettringite, C-S-H and C(N)-A-S-H gel. A large amount of gel and ettringite grew alternately, which reduced the porosity and formed a dense structure of the cementitious materials matrix, and its mechanical performances were improved. The leaching results showed that the synergistic effect also improved the solidification ability of the cementitious materials to Na+. In this work, the synergistic effect of RM-DG-FA significantly increased the utilization of solid wastes and the performances of cementitious materials. The research results provided a scientific basis for improving the utilization rate of alkaline solid wastes, sulfate solid wastes and silicon-aluminum character solid wastes and their collaborative utilization as building materials.

Feasibility of Preparing Red Mud-Based Cementitious Materials: Synergistic Utilization of Industrial Solid Waste, Waste Heat, and Tail Gas

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Resource Utilization Potential of Red Mud: A Study on the Micro-Mechanism of the Synergistic Effect of Multiple Solid Waste Filling Materials

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Utilization of Red Mud and Pb/Zn Smelter Waste for the Synthesis of a Red Mud-Based Cementitious Material

Design of All Solid Waste Red Mud-Based Cementitious Materials Based on the Simplex Centroid Method

Synergistic Activation Mechanism and Long-Term Properties of a Solid Waste Cementitious Materials Based on Red Mud and Calcium Carbide Slag

Utilization of Red Mud with High Radiation for Preparation of Autoclaved Aerated Concrete (AAC): Performances and Microstructural Analysis

Study on the Synergistic Preparation of Supplementary Cementitious Materials from Multiple Solid Wastes: Bayer Red Mud and Gold Tailings

Synergistic Effect of Red Mud, Desulfurized Gypsum and Fly Ash in Cementitious Materials: Mechanical Performances and Microstructure

Feasibility of Upcycling Red Mud for Low-Co2 Cement Via Calcination: a Comparative Study with FA and GGBFS Based in China

Evaluation of blends bauxite-calcination-method red mud with other industrial wastes as a cementitious material: properties and hydration characteristics.

Utilization of Waste from Alumina Industry to Produce Sustainable Cement-Based Materials

Preparation of Red Mud-Based Geopolymer Materials from MSWI Fly Ash and Red Mud by Mechanical Activation.

Synergistic Utilization, Critical Mechanisms, and Environmental Suitability of Bauxite Residue (red Mud) Based Multi-Solid Wastes Cementitious Materials and Special Concrete

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Utilization of Red Mud, Slag and Waste Drilling Fluid for the Synthesis of Slag-Red Mud Cementitious Material

Optimization of Proportions and Solidification Mechanism of All-Solid Waste Cementitious Materials Based on Circulating Fluidized Bed Fly Ash, Calcium Carbide Slag, and Red Mud

Synergistic utilization of red mud for flue-gas desulfurization and fly ash-based geopolymer preparation.

Utilization of Red Mud in Cement Production: a Review