Abstract:<p>Accuracy problem is one of the most challenging issues for the application of parallel robots in manufacturing industry, and kinematic calibration is a feasible approach to solve it. Although lots of researches have brought up a diversity of calibration methods, there are still rooms for the improvement of the accuracy, efficiency and robustness of these calibration effects. In this paper, an improved method for kinematic calibration of a 5-axis parallel machining robot is proposed, which includes a new forward kinematic solution (FKS) based on dual quaternion and a modified error modeling process leading to dimensionless error mapping matrixes (EMMs). On this basis, an iterative identification procedure is schemed, and the kinematics and identification simulations are carried out. The kinematics simulation results show that the proposed FKS has wider convergence range and faster computation speed than <em>Levenberg-Marquardt</em> algorithm, while the identification simulation results show that the residual pose errors with the proposed dimensionless EMMs are lower than that with the conventional EMM in various units. Additionally, the procedure of the full pose measurement with a laser tracker and an auxiliary tool is introduced, and thereby the contrast experiments of kinematic calibration on the prototype are conducted. The experiment results indicate that the residual position and orientation errors based on the dimensionless EMM decrease by 97.67% and 86.85% of the original values, respectively, at least, and by 76.77% and 38.65% of that based on the conventional EMM, respectively, at most. Consequently, it is further confirmed that the proposed calibration method is effective in enhancing the identification accuracy of the geometric errors and improving the positioning accuracy of the studied parallel robot.</p>

A Parameter Dimension Reduction-Based Estimation Approach to Enhance the Kinematic Accuracy of a Parallel Hardware-in-the-Loop Docking Simulator.

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

A Two-Stage Parameter Identification Method and Compensation Verification for Heavy Load Robot

A United Kinematic Calibration Method for a Dual-Machine System

Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Normal Contact Stiffness Identification-Based Force Compensation for a Hardware-in-the-loop Docking Simulator

Accuracy Improvement Calibrations for the Double-Position 4-PPPS Aircraft Docking System

A Parameter Self-Calibration Method for GNSS/INS Deeply Coupled Navigation Systems in Highly Dynamic Environments

A Force- and Position-Based Distortion Compensation Method for a Hardware-in-the-Loop Simulator of Space Docking

NONLINEAR PHYSICAL PARAMETER IDENTIFICATION OF THE DOCKING MECHANISM

Research on Fundamental Problems and the Solutions of HIL Simulation for On-orbit Docking Dynamics

A Force and Displacement Compensation Method Toward Divergence and Accuracy of Hardware-in-the-Loop Simulation System for Manipulator Docking

Simulation on HIL Ground Experiment Simulator for On-orbit Docking

A two-step method for kinematic parameters calibration based on complete pose measurement—Verification on a heavy-duty robot

Smith Predictor Compensation and Fuzzy Incremental Control for Delay of Space Docking Hardware-in-the-loop Simulation System

Kinematic calibration of a 5-axis parallel machining robot based on dimensionless error mapping matrix

Kinematic Parameters Calibration of Redundant Planar 2-Dof Parallel Manipulator with a New Error Function

The Research of Kinematic Calibration Method of Parallel 6-DOF Dock Platform

A Hardware-In-The-Loop Spacecraft Docking Simulation System And Its Stability Analysis

Optimization of pose samples for calibration of large component docking mechanisms