Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Optimization of pose samples for calibration of large component docking mechanisms

Enhanced Pose Adjustment System for Wing-Box Assembly in Large Aircraft Manufacturing.

Robust Kinematic Calibration for Improving Collaboration Accuracy of Dual-Arm Manipulators with Experimental Validation

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Kinematic Calibration for Articulated Arm Coordinate Measuring Machines Base on Particle Swarm Optimization

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

A United Kinematic Calibration Method for a Dual-Machine System

A Modeling and Calibration Method of Heavy-Duty Automated Fiber Placement Robot Considering Compliance and Joint-Dependent Errors

Numerical Study on Predicting and Correcting Assembly Deformation of a Large Fuselage Panel During Digital Assembly

Posture evaluation method for aircraft component based on hole feature

Multi Load-Transmitting Device Based Support Layout Optimization for Large Fuselage Panels in Digital Assembly

Pose Alignment of Aircraft Structures with Distance Sensors and CCD Cameras

Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process

Accuracy Improvement Calibrations for the Double-Position 4-PPPS Aircraft Docking System

Construction of a Measurement System and Analytical Solution for Docking Pose of Large Aircraft Components Based on Draw-wire Displacement Sensors

Robot Calibration Sampling Data Optimization Method Based on Improved Robot Observability Metrics and Binary Simulated Annealing Algorithm

A machining accuracy informed adaptive positioning method for finish machining of assembly interfaces of large-scale aircraft components

Pose Measurement and Assembly of Spacecraft Components Based on Assembly Features and a Consistent Coordinate System

A New Pose Measuring and Kinematics Calibrating Method for Manipulators